Mercedes SL500 Airbag error B1000 - Bosch 0285001358 [Sitemap]

aqua_life

20th January, 2020, 08:13 AM

Hello,
I have here Mercedes SL500 R230 with Airbag ECU bosch 0285001358.
I have error B1000 - ECU defect and airbag light always ON.
I already tried with some other files I found on forum, no luck.

I have done some modifications to my original file to try to solve the problem. Best I could get is a file with no error codes, however airbag light is flashing.
Attached I send you the 2 files. The original file and the file with no error but light flashing.

Anyone has solution for this problem ?

Many thanks for your help.

alex2019

20th January, 2020, 09:37 AM

hi, this should works fine.

aqua_life

20th January, 2020, 12:03 PM

I tried your file but same result.
No error present, but the airbag light is always flashing.

Any other idea ?

rafal

20th January, 2020, 05:21 PM

I tried your file but same result.
No error present, but the airbag light is always flashing.

Any other idea ?
here.....................

aqua_life

21st January, 2020, 01:25 PM

rafal, I tried your file but I have many errors.
B1000 - ECU defect
B1318 - coding faulty
B1308 - coding faulty

I think maybe hardware problem in this ECU. I will try to get a used one to try.

Thanks for your help

alex2019

22nd January, 2020, 04:11 AM

hi m8, are u sure u post the original file crash? or did u edited before?

aqua_life

30th January, 2020, 10:18 AM

Finally problem solved...
For anyone with the same problem the solution was:
With error B1000 you can try to program ECU with Star Diag however it doesn´t work. Always same error.
I have tried many different files on the internet however I always had error B1000 or Configuration error, until I found one file without error codes however airbag light always still ON. Difficult to understand why...

Then, with this file without errors I tried to program ECU with Star Diag and airbag light went OFF. All good, its running for some days now.

Hope it helps someone !

rafal

30th January, 2020, 10:45 AM

upload file.................

alex2019

31st January, 2020, 03:38 AM

Finally problem solved...
For anyone with the same problem the solution was:
With error B1000 you can try to program ECU with Star Diag however it doesn´t work. Always same error.
I have tried many different files on the internet however I always had error B1000 or Configuration error, until I found one file without error codes however airbag light always still ON. Difficult to understand why...

Then, with this file without errors I tried to program ECU with Star Diag and airbag light went OFF. All good, its running for some days now.

Hope it helps someone !

so with my files, u only need to program ecu by diag tool, then the lights went off?