systemlinux
20th January, 2020, 10:59 PM
Colleagues some help, I have trouble reading the EC EDC17C64 with KTAG.
EEPROM without problems.
MCU generates the problem in 15%
the vehicle starts and works very well despite the fact that the adblue is active on the board.
when it is read 15%, it is disconnected and gives error.
I am working with a 3A + 12v transformer, some recommendation
EEPROM without problems.
MCU generates the problem in 15%
the vehicle starts and works very well despite the fact that the adblue is active on the board.
when it is read 15%, it is disconnected and gives error.
I am working with a 3A + 12v transformer, some recommendation