PDA

View Full Version : VW PASSAT ADBLUE OFF


systemlinux
20th January, 2020, 10:59 PM
Colleagues some help, I have trouble reading the EC EDC17C64 with KTAG.


EEPROM without problems.


MCU generates the problem in 15%
the vehicle starts and works very well despite the fact that the adblue is active on the board.


when it is read 15%, it is disconnected and gives error.


I am working with a 3A + 12v transformer, some recommendation
systemlinux
21st January, 2020, 02:43 AM
some help...
worldiagnostic
24th January, 2020, 10:45 AM
Ask for Alientech support.
Dietrich
24th January, 2020, 11:20 AM
Ask for Alientech support.

They will definitely reply to guy with Chinese ktag :)
systemlinux
28th January, 2020, 08:48 PM
Sorry for not answering altiro, but solve it by changing the transformer.


The failure occurs, because the + 12v 1A transformer that brings the ktag master clone, does not support the total consumption of this type of ECU.


Solution replace with another charger, in this case replace it with one of a laptop that works + 12v 3A, obviously reusing the input tip.