peugeot 508 smart key immo off

[eslam451]

pleas i have peugeot 508 M 2013 was working normal Except cooling fan working on high speed with ignition
then some one i don't know what he did with the car by diagnostic tool,now the car didn't start any more and
give me the attached error codes. and fuel pump there is no positive electrode with ignition
pleas i need your help to immo off or repair the original ECU files.
pleas help me because i am In a big trouble

bosch MED17.4.2
0261S06833
9676962780
B.RGDS

[systemlinux]

Supplications that I have Peugeot 508 M 2013 worked normal Except The Cooling Fan Working a High Speed with On,
Then Someone who did not know what He did with the car with a Diagnostic Tool, Now the car does not start anymore and
Give me the error codes attached. and the fuel pump there is no positive electrode with
ignition reasons. I need your help to remove or repair the original ECU files.
by


favor
help me because I'm in big trouble bosch MED17.4.2 0261S06833
9676962780


load the read MPC with ktag to immo off.




activating the engine, the entire vehicle must be activated ...




then return the original files to the ecu.




If all is well, you should not have problems ...








This procedure is performed only to remove it from protected mode.

[eslam451]

Supplications that I have Peugeot 508 M 2013 worked normal Except The Cooling Fan Working a High Speed with On,
Then Someone who did not know what He did with the car with a Diagnostic Tool, Now the car does not start anymore and
Give me the error codes attached. and the fuel pump there is no positive electrode with
ignition reasons. I need your help to remove or repair the original ECU files.
by


favor
help me because I'm in big trouble bosch MED17.4.2 0261S06833
9676962780


load the read MPC with ktag to immo off.




activating the engine, the entire vehicle must be activated ...




then return the original files to the ecu.




If all is well, you should not have problems ...








This procedure is performed only to remove it from protected mode.

thanks a lot for your interest
i attached the Ecu MPC+EEPROM+BACKUP Read by ktag.
how to
activating the engine, the entire vehicle must be activated ...?
and after i writ the mpoc immo off what i have to do step by step please

B.RGDS

[systemlinux]

thanks a lot for your interesti attached the Ecu MPC+EEPROM+BACKUP Read by ktag.how to activating the engine, the entire vehicle must be activated ...?and after i writ the mpoc immo off what i have to do step by step pleaseB.RGDS


test and comment

[eslam451]

test and comment

thanks a lot brother
i just want to confirm the steps with you
1- i will write MPC immo off to ECU
2- i put ecu back in the car and start it.
3-wite back orginal MPC to ECU.
do i am right?
about step 2 car should start or not?

B.RGDS

[systemlinux]

thanks a lot brother
i just want to confirm the steps with you
1- i will write MPC immo off to ECU
2- i put ecu back in the car and start it.
3-wite back orginal MPC to ECU.
do i am right?
about step 2 car should start or not?

B.RGDS

1. write the immo off MPC la ecu (100% charged battery)
2. Start the engine for at least 15 minutes of operation.
3. Reload the original MPC file to the ecu and start the engine again.


If the files are good, everything should be perfect.

[eslam451]

1. write the immo off MPC la ecu (100% charged battery)
2. Start the engine for at least 15 minutes of operation.
3. Reload the original MPC file to the ecu and start the engine again.


If the files are good, everything should be perfect.


ok bro i will try today and i will update you