Need Help about BMW 320i E36 MS 41.0 ECU --Popcorn/Hardcut/RPM

[TSC2010]

hello...
anybody can help me on this ecu ?
need a stage 1 with popcorn, hardcut and rpm 7000 u/min
thanks for help

in attachment original file
and one of 5 tunings who not work with pop/hc/rpm

[Lambda1]

Here you whishes.
Oh and no Stage 1... such something isnt possible. Or at least no for free.
So only options.

Ask your customer if you can do vid.

[khaos87]

"ori." map isnt ori... got weird changes but here you whishes.
Oh and no Stage 1... such something isnt possible. Or at least no for free.

Ask your customer if you can do vid.
Mate, your "not stage 1" its better than most stages 1 from tuning companies or "tuners" You really know what to do for those cars...
Respect!

[Lambda1]

Tune never depends on logs... simple blablabla iam a tuner file.. its crap.
See worser ones here in last days but this is also bad xD.
Some ign., fuel... all whats done...

For you ... little advise, see ign. map and think about the red lined values :D ... 20° more ignition :).
~10 maps "remapped" ... some of them didnt need to... forget about the main maps which really important for this engines...


Mate, your "not stage 1" its better than most stages 1 from tuning companies or "tuners" You really know what to do for those cars...
Respect!
Thanks. Glad you enjoy.

[TSC2010]

much thanks but solution not work...anybody tested solution for this ecu=?

[Lambda1]

its tested and 100% well.
maybe you didnt heat watertemperature over 70°C... its needen for.
Fire also only if straight pipe ;).

did you re-read after and check you write to ecu... because often beginner forget about pin 18... programming power bridge in connector...

[TSC2010]

works fine mate... much thanks
problem was kess dont write the changes

[Lambda1]

kess do or it think it was doing, but you forget about the PIN bridge I told you about ;)... to let ms41 going into programming mode.

[costyrzv]

Can I get the pass for that one too ?

[Lambda1]

only for file owner.sorry mate.