View Full Version : EZS Sprinter A906 545 64 08
tom3212
22nd January, 2020, 09:19 AM
Hello
Can somebody check me if it's ok?
mileage was 458647
and should be 461574
rdu04
22nd January, 2020, 09:28 AM
test this.0km,modify in dash and all is ok.original is 458647
but and 461574 is correct
jomberykaso
22nd January, 2020, 02:06 PM
Hello
Can somebody check me if it's ok?
mileage was 458647
and should be 461574
Mileage was 458647 kms and your file is good, it has 461574 kms
tom3212
23rd January, 2020, 06:10 PM
Hello
I read the R270 read fairly well
but how I want to save it doesn't go
xprog I don't want to read it at all, I don't want to read it,
what to do
Cllau
23rd January, 2020, 06:55 PM
Hello
I read the R270 read fairly well
but how I want to save it doesn't go
xprog I don't want to read it at all, I don't want to read it,
what to do
by saving you mean => to write back???:questionmark::questionmark::captain:
tom3212
23rd January, 2020, 06:58 PM
Hello
I read the R270 read well
but if I want to program, I can't do it
tom3212
23rd January, 2020, 06:59 PM
now identifies ok as 0L01Y but will not read
Cllau
23rd January, 2020, 07:05 PM
check soldering and connections and read again to make sure all ok and if you get a good read then try to write again....:captain:what pin out are you using post a pic...
tom3212
23rd January, 2020, 08:03 PM
strange because I've never had a problem
because he read and programmed
and now they don't want to program it
, it looks like something disturbed him
or reads very slowly
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.