Chev Aveo milage correction

[ecufix]

Hi please will you correct this reading to 101000km ,thanks regards

[ecufix]

Hi please will you correct this reading to 101000km ,thanks regards
A bit more info dump from 93c56 and about 2008 modle Aveo,thanks

[ecufix]

My dump was corrupt ,I downloaded e fresh dump and used Thacosoft ,all good now, regards

[ecufix]

My dump not corrupt, when i use the above "solution" the mileage is correct however the speedometer does then not work ,put the corrupt file back ,the original mileage displays and speedo works ? Any ideas ,thanks,regards

[ecufix]

This job just wont come right, the attached dump works in the car and the milage is 0km, Using Tach123, the format is different , please help ,change to 101k km,thanks ,regards

[jomberykaso]

your file is not good, if you want i can share one of mine with mileage you need

[ecufix]

your file is not good, if you want i can share one of mine with mileage you need

Yes please

[ecufix]

your file is not good, if you want i can share one of mine with mileage you need

With this one milage shows correct speedo dont work,https://www.digital-kaos.co.uk/forums/showthread.php/801054-Chev-Aveo-milage-correction?p=3776261&viewfull=1#post3776261

[jomberykaso]

what year is the car?

[ecufix]

what year is the car?
2008 chev aveo

[jomberykaso]

2008 chev aveo

Here is your file

[ecufix]

Here is your file
Now it displays "ERROR"

[jomberykaso]

my file is good edited but here there is something strange, can you post a picture of your dash?

Now Im online again...so try to be faster to help you

[ecufix]

my file is good edited but here there is something strange, can you post a picture of your dash?

Now Im online again...so try to be faster to help you
Please find the photos attached.

Thank you

[zckariya70]

Here Try this dump.............

[ecufix]

Here Try this dump.............
Going to try it later,f you look at the original dump we see only ff in first 2 lines ?

[jomberykaso]

i think you didnt remove the eeprom from dash before reading and only used this trick and pomona clip...you have to remove it and write my file there.

686224

[zckariya70]

Going to try it later,f you look at the original dump we see only ff in first 2 lines ?


This file is same as ur cluster, that's Y i send u this dump write this file and post the result