Fiat Punto 1.2 Virgin

[nezocas]

Hi,

ECU read with galletto....need virgin from this file.... ori ECU is missifiring, and not with a easy solder job.


ECU:

IAW 59F.M3 61600.376.07
HW 303 / 1812-0MZ
71736339 D032

[nezocas]

Hi,

I have tried to write same file.... here on DK someone said that with same file galletto when writing it back to the ECU will make it virgin.....but it didnt.

Can someone make it virgin

Regards

[rafal]

you need read eeprom................

[nezocas]

How to do that

[12manux]

I changed one ecu on that type of car.If you have FVDI you can copy the eeprom dump by obd and write it on the new ecu .

[nezocas]

I changed one ecu on that type of car.If you have FVDI you can copy the eeprom dump by obd and write it on the new ecu .

Hi,

Thank´s.... I dont have FVDI

Custumer bougth a brand new ECU 450€ .... more than the value of the car.... but it was it´s choice.

I am in an stand still, dont know if I will build an decoder for this ECUs or buy one from one of the members here in DK

For now problem solved

[Panathaole]

Hi,

Thank´s.... I dont have FVDI

Custumer bougth a brand new ECU 450€ .... more than the value of the car.... but it was it´s choice.

I am in an stand still, dont know if I will build an decoder for this ECUs or buy one from one of the members here in DK

For now problem solved

I am interested too.... But I don't think it worth the price....(~150€)

[adiagnostyka]

For only one job isn't worth, but if you work with cars it is worth :)

[Panathaole]

Hi

If FVDI can read eeprom from this ecus with <100 & >100 h/w then not worth it at all

I have found that tool with 80€ but the seller can't confirm that the tool works with h/w under 100....

[nezocas]

I am interested too.... But I don't think it worth the price....(~150€)

The price is good, for the components and job involved to build it.

I will spend 150€ and this is the first ECU in my hand... and there is also the price of the scrapyard ECU, Not sure when will get the money of the tool back in my pockect.

[adiagnostyka]

I have both tool. My fvdi never have problem with thus type of ecu. Fvdi make automatic virgin. Iaw59f tool work also ok but sometimes have problem with <100 hw. Iaw tool is quicker and can make automatic off but i think fvdi is beater cos work on more ecu type's :)