lettus
25th January, 2020, 12:02 AM
I've successfully cloned an IMMO chip and original ECU data. I have 2 working ECU's. So I figured time to get this thing running right.
I've searched a bit in regards to the 0261204559/1037359462 ECM maybe someone can look over the 2 original ECU files that I've uploaded, they should be the same just drom different v70XC ECM Dumps.
Anyhow-- I need to change a few things to make this thing run a bit better....
automatic trans
19T turbo
Green Top Injectors
Full 3in Exhaust
Intank dual 255 wallys
Pretty much just stock part mis-mash. I'd like to get a good starting point nailed out.
Yes I have a data-logger AFR/ all 5-EGT's/ the whole gambit.
Maybe someone can help note where the
torque limit
fuel map(s)
ignition map(s)
injector settings for green top
I've downloaded quit a few maps from this site and read threw quite a few ME7/0261204559 thread(s). Have WinOLS setup and can view/change things. I just don't feel comfortable all willy nilly modifying things. A few pointers in the right direction would be nice. Maybe I missed a working damos for these particular dumps? I have several damos files for some R model ECU found on here.. Any, insight's, advice, pointers, links.
Sorry if this is a double post for anyone asking the same thing.
Thanks in Advance!
Lettus
I've searched a bit in regards to the 0261204559/1037359462 ECM maybe someone can look over the 2 original ECU files that I've uploaded, they should be the same just drom different v70XC ECM Dumps.
Anyhow-- I need to change a few things to make this thing run a bit better....
automatic trans
19T turbo
Green Top Injectors
Full 3in Exhaust
Intank dual 255 wallys
Pretty much just stock part mis-mash. I'd like to get a good starting point nailed out.
Yes I have a data-logger AFR/ all 5-EGT's/ the whole gambit.
Maybe someone can help note where the
torque limit
fuel map(s)
ignition map(s)
injector settings for green top
I've downloaded quit a few maps from this site and read threw quite a few ME7/0261204559 thread(s). Have WinOLS setup and can view/change things. I just don't feel comfortable all willy nilly modifying things. A few pointers in the right direction would be nice. Maybe I missed a working damos for these particular dumps? I have several damos files for some R model ECU found on here.. Any, insight's, advice, pointers, links.
Sorry if this is a double post for anyone asking the same thing.
Thanks in Advance!
Lettus