Log in

View Full Version : 2013 Kia optima 95910-4C010 Need help to check my clear


tech020
26th January, 2020, 08:12 AM
Hello i got 2013 Kia optima 95910-4C010
Can someone check my clear file if i did it correct? car have weird codes im not sure if module problem or car wiring.. Thank you
agstur
26th January, 2020, 09:22 AM
Hello i got 2013 Kia optima 95910-4C010
Can someone check my clear file if i did it correct? car have weird codes im not sure if module problem or car wiring.. Thank you
.....try harder
tech020
26th January, 2020, 08:26 PM
can someone help me with it please.
agstur
26th January, 2020, 08:36 PM
I can't help you with this!
My tool doing the job through CAN.
I am sorry.
I am sure someone will help!
Good luck
ateyourv8
26th January, 2020, 11:31 PM
Here you go, pass in PM.
tech020
27th February, 2020, 03:58 AM
still have unknown error anyone have solution for this module?
alex2019
27th February, 2020, 04:21 AM
still have unknown error anyone have solution for this module?

dude, tell what's the DTC , there's no such "unknown error" dtc.
tech020
27th February, 2020, 05:42 AM
U3FFF is the error.
alex2019
27th February, 2020, 05:55 AM
hi, test this and report back
ReverseFlash
27th February, 2020, 06:20 AM
I can't help you with this!
My tool doing the job through CAN.
I am sorry.
I am sure someone will help!
Good luck

How can you do this through CAN? Thought only Infineon can be done through CAN. I know Carprog released a tool for Nissan, Ford, Mazda, Subaru, and VW External Eeprom.
agstur
27th February, 2020, 06:48 AM
How can you do this through CAN? Thought only Infineon can be done through CAN. I know Carprog released a tool for Nissan, Ford, Mazda, Subaru, and VW External Eeprom.

IProgPro can do this by Can!
ReverseFlash
27th February, 2020, 06:58 AM
IProgPro can do this by Can!

Interesting, I'm going to purchase clone from Ali. Thanks.
tech020
27th February, 2020, 05:50 PM
Clone iprog+ can not read this over OBD! I tried on this module. Clone iprog+ sucks, buy original.

alex2019 (https://www.digital-kaos.co.uk/forums/member.php/635672-alex2019) Thank you. i will try and report.
tech020
28th February, 2020, 09:17 PM
ateyourv8 (https://www.digital-kaos.co.uk/forums/member.php/551331-ateyourv8) your file worked good actually but i think you erased little more than needed. The module was the problem.

alex2019 (https://www.digital-kaos.co.uk/forums/member.php/635672-alex2019) your file gives two errors and will not erase.
B1490 OCCUPANT DEFECT
B1651 CRASH RECORD DRIVER SIDE


File im attaching is file that required minimal tampering to clear the crash data codes. For everyone on DK
ReverseFlash
29th February, 2020, 07:04 AM
Clone iprog+ can not read this over OBD! I tried on this module. Clone iprog+ sucks, buy original.

alex2019 (https://www.digital-kaos.co.uk/forums/member.php/635672-alex2019) Thank you. i will try and report.

Are you sure, I bought it to test. Apparently this is a good one.
https://www.aliexpress.com/item/32856385452.html?spm=a2g0s.9042311.0.0.5c914c4dwsO LCT

Saw alot of members here read a lot of modules by obd using clone. I don't see why this wont work. If it doesn't work, its alright. Some functions should work.
tech020
2nd March, 2020, 03:56 AM
On this particular kia/hyndai Mobis v1.1 memory 95256 clone did connect and read part number correct but when i tried to read it gave this error "Authentication error"