Zenec ZE-NC2010

[patifon]

I have readed flash K9F1G08U0B and try it with martech.
martech give code 65535, but unit ask for 4digit code.Tnx in advance..

[momogsm]

HI

AntiCode = 65535
Code = 0000
Code = 65535

[Dekster]

I have readed flash K9F1G08U0B and try it with martech.
martech give code 65535, but unit ask for 4digit code.Tnx in advance..
Hi,

Try......
AntiCode = 65535
Code = 0000
Code = 65535

[patifon]

28.01.2020 17:14:22
VW ZE-NC2010 by Zenec [ K9F1G08U0B ]
ZE-NC2010\K9F1G08U0B main
Code:
AntiCode = 65535
Code = 0000
Code = 65535
Does not work!

[sonices]

Most Zenec radio's are User chosen codes, try 012345 or 12345

[patifon]

Most Zenec radio's are User chosen codes, try 012345 or 12345
Chek.Not work!

[sonices]

Sorry....I have compared few dumps from K9F1G08U0B and always is
AntiCode = 65535
Code = 0000
Code = 65535
So i dont think code is stored here, i think on this unit is ATMega an code should be there, can you make photo of boar and look if there is ATMega i think near front panel

[andm266]

I think the code is in the flash in the navigation module.

[patifon]

No Atmega.

[patifon]

How to find out the super code of the device?

[patifon]

The issue was resolved,ZENEC ZE-NC2010 RECOVERY:dancing:

[oltik]

Hello!I am in the same situation it asking for pin code.I ve dowload recovery update ,i made a microsd card 2gb sandisk with 3 files and a kingston usb 4gb with aplication folder.But when star the navigation the update process won t start.Coud you give an advice?Thanks!Or a link maybe your file is different?

[Titanium2011]

hi....any solution for zenec nc 2010 , where is code location??? here are the pictures


manny thanks to all in advance

[Dekster]

hi....any solution for zenec nc 2010 , where is code location??? here are the pictures


manny thanks to all in advance
Hi,
716057

[Titanium2011]

hi ...now i have read from 3 navigation ZENEC NC 2010! and read from 3 chip K9F1G08U0B

I v try codes like 1234 ,0000,1111 they are not good!

here are the files ...can you help me with this

https://mega.nz/folder/nnABVSTL#0bmp0jGARnlRnWPLn8Qkbg

[Dekster]

hi ...now i have read from 3 navigation ZENEC NC 2010! and read from 3 chip K9F1G08U0B

I v try codes like 1234 ,0000,1111 they are not good!

here are the files ...can you help me with this

https://mega.nz/folder/nnABVSTL#0bmp0jGARnlRnWPLn8Qkbg
Hi,
https://translate.google.pl/translate?hl=pl&sl=pl&tl=en&u=https%3A%2F%2Foematic.pl%2Fblog%2Fdlaczego-kod-0000-nie-pasuje-do-radia-zenec-2010%2F

[Dekster]

hi ...now i have read from 3 navigation ZENEC NC 2010! and read from 3 chip K9F1G08U0B

I v try codes like 1234 ,0000,1111 they are not good!

here are the files ...can you help me with this

https://mega.nz/folder/nnABVSTL#0bmp0jGARnlRnWPLn8Qkbg

Try ......... 172005

[Titanium2011]

What chip? 1 2 3? Manny thanks

[Dekster]

What chip? 1 2 3? Manny thanks
....... Chip nr 2

[Titanium2011]

Manny thanks mate

[Dekster]

Exelent...works! Now can you help with 1 and 3?

Manny thanks mate

1. 172005 or 835665
3. 000000 or 172005

[Titanium2011]

Not good....it is still locked, 1 and 2...eeror code

[shooting]

Not good....it is still locked, 1 and 2...eeror code

For me code is 658963

wbr

[Titanium2011]

658963 not good

[Titanium2011]

Any other solution??

Many thanks to all

[rateb]

Hı
ı have recorder ze.nc2010 works the logo appears turns off
help plz