View Full Version : Audi 1.8T AGU Bosch M3.8.3 Injector Scaling from 350cc to 440cc???
r19alpine
28th January, 2020, 10:57 PM
Hi,
This possibly a long shot, but could anyone please change the injector scaling in the M3.8.8 audi 1.8T AGU file attached from its current 350cc to 440cc @ 3bar.
attached calibration is currently setup for 350cc with K04 and VR6 MAF making around 20psi.
Thanks for any help.
morgano
29th January, 2020, 12:47 PM
For 350cc injectors
KRKTE =
0,093098201280902
For 440cc injectors
KRKTE =
0,074055387382536
if i am not mistaken.
Regards,
icezero2010
29th January, 2020, 01:00 PM
Hi,
This possibly a long shot, but could anyone please change the injector scaling in the M3.8.8 audi 1.8T AGU file attached from its current 350cc to 440cc @ 3bar.
attached calibration is currently setup for 350cc with K04 and VR6 MAF making around 20psi.
Thanks for any help.
your file is complete crap my friend go to a good tuner
there is no other injectors there is no maf rescale
and all other is also crap :-D
like to see
icezero2010
29th January, 2020, 01:02 PM
For 350cc injectors
KRKTE =
0,093098201280902
For 440cc injectors
KRKTE =
0,074055387382536
if i am not mistaken.
Regards,
this is agu no me7 u have no krkte u have grundanpassungs factor and constate
morgano
29th January, 2020, 01:51 PM
this is agu no me7 u have no krkte u have grundanpassungs factor and constate
Lol then i was mistaken [emoji23] i had in mind that those m3.8.3 were same as me7 but cable throttle instead electronic.
I must sleep more [emoji12]
vitaliyl
29th January, 2020, 02:23 PM
file corrupted, bad reading in programmator
icezero2010
29th January, 2020, 04:00 PM
file corrupted, bad reading in programmator
the read is not crap its the file :-)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.