PDA

View Full Version : 1.9TDI PD150 Torque limit



rpmotorsport10
29th January, 2020, 02:52 AM
Can anyone please tell me what is the value limit for a Torque limit on original injector in mg ?
Thanks

Johnsy1998
29th January, 2020, 11:16 AM
Limit the torque under the torque rating of clutch

I wouldn't go any higher than 300lbft

rpmotorsport10
29th January, 2020, 07:09 PM
The car have clutch reforced and a 1756vk

waynemodz
29th January, 2020, 09:04 PM
Max boost for ARL 3bar... max nm 600nm safe.

golf110tdi
29th January, 2020, 10:21 PM
I cannot believe that this engine can handel with 600Nm. The problem is connecting rods.

rfernandes
30th January, 2020, 12:30 AM
You can go for 100mg on stock injector

maajkii
30th January, 2020, 09:31 AM
You can go for 100mg on stock injector

hahahahahaha, with HF100 i think :applause:

stock AL injectors can handle around 72MG of fuel. regards

golf110tdi
30th January, 2020, 06:04 PM
Hahahaha, 100mg for stock injectors is to much because you have to put huge duration and probably not much time to melt the pistons and turbo.

SALAS
30th January, 2020, 07:27 PM
Safe 70-80mg more than that big EOI and you will have negative torque and big EGT

rfernandes
31st January, 2020, 12:35 AM
Bigger turbo,clutch,xxl intercooler and 3bar map sensor...stock injector...100mg tested...no piston melted or any issues

rpmotorsport10
31st January, 2020, 03:43 AM
Private message

golf110tdi
31st January, 2020, 07:22 AM
With 100mg at 4000rpm - 278hp
100mg at 4200rpm - 292hp
100mg at 4400rpm - 306hp
100mg at 4500rpm - 313hp
For stock injectors is too much power.