PDA

View Full Version : CAS3+ 0L15Y ISN


jjean34
29th January, 2020, 03:00 PM
Hello I have a mini R56 I was forced to replace the DME. and now I have to replace ISN in CAS3 +. can someone help me replace the dump eeprom isn? thanks a lot.

551CDBAB1CCA74F170234E3A5117F862 INS

key info for decrypted. keys 1: 33 E3 35 98
crypto: low 6b 9f d9 b3 high: c6 1a
CFG / pass: c8 49 1e 4b
TMCF / psw C8 32 70 23

user 1: 04 62 11 54
user 1: 30 66 13 22
user 2: FF 21 13 0b
usser 3: FE 00 01 3rd
here is all the info for the decryption.
and change ISN of DME because I put a new DME.
I also attached the DUMP of the DME if necessary. these a MEV1722
droidwayne65
29th January, 2020, 03:17 PM
I'm lost. The posted ISN is already in the CAS.
jjean34
29th January, 2020, 03:25 PM
relating to ista it always shows me the same error code.

the isn code i wrote down is the right one in the DME dump?
doctore
29th January, 2020, 03:26 PM
tell my m8
do you start car with your changes:)
jjean34
29th January, 2020, 03:29 PM
no it doesn't start. engine light stays on.
droidwayne65
29th January, 2020, 03:41 PM
no it doesn't start. engine light stays on.
Do you have original dumps of the CAS? Also the of original ECU?
jjean34
29th January, 2020, 03:48 PM
Yes of course. joint DUMP DME and that of the eeprom. I could not recover the old DME because it was HS nobody could extract the dump.
doctore
29th January, 2020, 03:58 PM
Tr m8
and post result:chuncky:
jjean34
29th January, 2020, 04:03 PM
dump eeprom that I need to restore?
I try that and give you the result
jjean34
29th January, 2020, 04:18 PM
try both dumps and still not and do not start.
doctore
29th January, 2020, 04:42 PM
what error in cas and dme
jjean34
29th January, 2020, 05:14 PM
what error in cas and dme
Protection against tampering SWT: engine speed limitation stage 2
jjean34
29th January, 2020, 05:21 PM
when I edit my DUMP MEV1722 in the part where I find the ISN code there is also a series of repetitive code starting with 63 this will not be there and I will be wrong code? because when I read ISN code with ACDP it gives me the first my editio there is a second
jjean34
29th January, 2020, 06:08 PM
after rummaging around I noticed a possible error. a missing figure on the ISN code 551CDBAB1CCA74F170234E 3 A5117F862. the 3 between E and A was not entered. can someone check and modify?
doctore
29th January, 2020, 10:50 PM
where are not entered number 3:hmmmm2:
jjean34
30th January, 2020, 08:05 AM
in fact these check the ISN code in CAS that a number or letter is not missing. after I have these more or look for this concern
jjean34
30th January, 2020, 03:09 PM
Good after looking for it may be that in fact everything is good except the dme itself. after looking for default equivalent to mine current certain we speak of an error of soft DME after having changed it was settled and another had to install a DME same serial number mes which was installed on one and c is why ista p requests an FSC code to unlock it. has this ever happened to you?