PDA

View Full Version : DPF OFF KIA EDC17CP14



systemlinux
1st February, 2020, 02:01 AM
Some colleague can help me with this solution


Original flash has the following problems
- Check engine flashes
- White smoke
- It has no power (does not exceed 2500rpm and 80km / h)
- DTC ACTIVE P2455
- DTC ACTIVE P1591
- DTC ACTIVE P0406


Flash with DPF OFF EGR OFF
- No ACTIVE DTC
- It has no power (does not exceed 2500rpm and 80km / h)


I upload both files, can someone help

naskochipa
1st February, 2020, 09:11 AM
Some colleague can help me with this solution


Original flash has the following problems
- Check engine flashes
- White smoke
- It has no power (does not exceed 2500rpm and 80km / h)
- DTC ACTIVE P2455
- DTC ACTIVE P1591
- DTC ACTIVE P0406


Flash with DPF OFF EGR OFF
- No ACTIVE DTC
- It has no power (does not exceed 2500rpm and 80km / h)


I upload both files, can someone help

pass- PM

thancks and reputation

test nad report

Upload the original file reset the DPF and upload my solution :)

systemlinux
1st February, 2020, 01:57 PM
pass- PM

thancks and reputation

test nad report

Upload the original file reset the DPF and upload my solution :)


Thanks colleague, I will comment on the final result


thanks + reputation delivered

systemlinux
5th February, 2020, 02:12 AM
pass- PM

thancks and reputation

test nad report

Upload the original file reset the DPF and upload my solution :)


Perform the steps


1. Load original flash file
2. DPF regeneration
3. Load DPF EGR OFF file


The vehicle remains in the same conditions


1. Check Engine blinking
2. Active DTCS (already indicated)
3. It has no power, limited to 2500rpm and does not exceed 80km / h.
4. White smoke.


When I record the modified file (dpf off) and then read it again, to make the comparison of these, they are not equal, that is, the file is not recorded 100% in the ecu.


You can do the same, but this time in the MPC file.

systemlinux
5th February, 2020, 03:20 PM
Some effective help colleagues thank you