BMW f30 320i help remove dtc

[amelio1k]

Hi guys can anyone help me remove a dtc from a bmw f30 320i with n20 engine it has mevd17.2 ecu file is attached please remove dtc 152008 thanks

[pike]

Hi,

1520 - Camshaft Position Actuator!

[amelio1k]

Hi,

1520 - Camshaft Position Actuator!

152008 is manufacturer specific code
152008 ignition circuit supply voltage, bank failure or engine failure.
Car will start and run fine for a day or so then start and switch off throwing this code.... engine only runs for like 3 to 4 seconds then you leave it to stand for a day or sometimes a few hours she starts and runs its intermittent and I cant seem to get to the bottom of it code related to spark but I've changed coil pack checked wiring all fuses but still no luck. Power for coil packs is coming direct from ecu

[pike]

Here DTC 152008 off file

[pike]

interesting signature from user who asks for help DTC off in mevd17.2

[kiszka]

152008 is manufacturer specific code
152008 ignition circuit supply voltage, bank failure or engine failure.
Car will start and run fine for a day or so then start and switch off throwing this code.... engine only runs for like 3 to 4 seconds then you leave it to stand for a day or sometimes a few hours she starts and runs its intermittent and I cant seem to get to the bottom of it code related to spark but I've changed coil pack checked wiring all fuses but still no luck. Power for coil packs is coming direct from ecu
unpin the cube from the sensor and try to start the engine
you'll see what awaits you after removing the error from dtc