fuzz1
5th February, 2020, 04:20 PM
I tried coding the mirrors for Audi Q3 with a Launch mini pros and was succesful.
Procedure below was meant for vag com cable but was successful with the launch diagnostic tool
[42 - Door Elect. Driver]
[Coding - 07] -> [Long Coding Helper] -> [Byte 4]
[Bit 6 - Undocumented (1 = active) in Binary String]
=> Change Bit 6 (http://i.viglink.com/?key=38915f74271930e6f963d377ea84a39e&insertId=4c21a12d8d605a6c&type=H&exp=60%3ACI1C55A%3A16&libId=k69gf10m0100re3y000DAam6bfgxi&loc=https%3A%2F%2Fwww.audiq3forum.com%2Fforum%2F65 8-vcds-vag-com-mods%2F4914-automatically-fold-mirrors-upon-locking.html&v=1&iid=4c21a12d8d605a6c&opt=true&out=https%3A%2F%2Fwww.amazon.com%2Fdp%2FB081VMYTYH&ref=https%3A%2F%2Fwww.google.com%2F&title=Automatically%20Fold%20Mirrors%20Upon%20Lock ing%20-%20Audi%20Q3%20Forum&txt=%3Cspan%3EChange%20%3C%2Fspan%3E%3Cspan%3EBit% 20%3C%2Fspan%3E%3Cspan%3E6%3C%2Fspan%3E) to 1
Note : Bit 0 (http://i.viglink.com/?key=38915f74271930e6f963d377ea84a39e&insertId=5a7e0c001e056dc9&type=H&mid=790&exp=60%3ACI1C55A%3A16&libId=k69gf10m0100re3y000DAam6bfgxi&loc=https%3A%2F%2Fwww.audiq3forum.com%2Fforum%2F65 8-vcds-vag-com-mods%2F4914-automatically-fold-mirrors-upon-locking.html&v=1&iid=5a7e0c001e056dc9&opt=true&out=https%3A%2F%2Fwww.pjatr.com%2Ft%2F1-790-43737-790%3Furl%3Dhttp%253A%252F%252Fwww.trainz.com%252F p-442835-tamiya-74090-fine-drill-bit-02mm.aspx&ref=https%3A%2F%2Fwww.google.com%2F&title=Automatically%20Fold%20Mirrors%20Upon%20Lock ing%20-%20Audi%20Q3%20Forum&txt=%3Cspan%3EBit%20%3C%2Fspan%3E%3Cspan%3E0%3C%2F span%3E) is at the far right of the binary string
The old HEX value for this byte was prolly 1C; Binary Value [00011100]
and the NEW HEX (http://i.viglink.com/?key=38915f74271930e6f963d377ea84a39e&insertId=f7e10e1505f5ad12&type=H&exp=60%3ACI1C55A%3A16&libId=k69gf10m0100re3y000DAam6bfgxi&loc=https%3A%2F%2Fwww.audiq3forum.com%2Fforum%2F65 8-vcds-vag-com-mods%2F4914-automatically-fold-mirrors-upon-locking.html&v=1&iid=f7e10e1505f5ad12&opt=true&out=https%3A%2F%2Fwww.amazon.com%2Fdp%2FB07BMCXL5C&ref=https%3A%2F%2Fwww.google.com%2F&title=Automatically%20Fold%20Mirrors%20Upon%20Lock ing%20-%20Audi%20Q3%20Forum&txt=%3Cspan%3ENEW%20%3C%2Fspan%3E%3Cspan%3EHEX%3C% 2Fspan%3E) value should be typed in as 5C; Binary Value [01011100]
Esc or Exit
Transfer Coding
Do It!
[52 - Door Elect. Pass.]
[Coding - 07] -> [Long Coding Helper] -> [Byte 4]
[Bit 6 - Undocumented (1 = active) in Binary String]
=> Change Bit 6 to 1
Note : Bit 0 is at the far right of the binary string
The old HEX value for this byte was prolly 1E; Binary Value [00011110]
and the NEW HEX value should be typed in as 5E; Binary Value [01011110]
Esc or Exit
Transfer Coding
Procedure below was meant for vag com cable but was successful with the launch diagnostic tool
[42 - Door Elect. Driver]
[Coding - 07] -> [Long Coding Helper] -> [Byte 4]
[Bit 6 - Undocumented (1 = active) in Binary String]
=> Change Bit 6 (http://i.viglink.com/?key=38915f74271930e6f963d377ea84a39e&insertId=4c21a12d8d605a6c&type=H&exp=60%3ACI1C55A%3A16&libId=k69gf10m0100re3y000DAam6bfgxi&loc=https%3A%2F%2Fwww.audiq3forum.com%2Fforum%2F65 8-vcds-vag-com-mods%2F4914-automatically-fold-mirrors-upon-locking.html&v=1&iid=4c21a12d8d605a6c&opt=true&out=https%3A%2F%2Fwww.amazon.com%2Fdp%2FB081VMYTYH&ref=https%3A%2F%2Fwww.google.com%2F&title=Automatically%20Fold%20Mirrors%20Upon%20Lock ing%20-%20Audi%20Q3%20Forum&txt=%3Cspan%3EChange%20%3C%2Fspan%3E%3Cspan%3EBit% 20%3C%2Fspan%3E%3Cspan%3E6%3C%2Fspan%3E) to 1
Note : Bit 0 (http://i.viglink.com/?key=38915f74271930e6f963d377ea84a39e&insertId=5a7e0c001e056dc9&type=H&mid=790&exp=60%3ACI1C55A%3A16&libId=k69gf10m0100re3y000DAam6bfgxi&loc=https%3A%2F%2Fwww.audiq3forum.com%2Fforum%2F65 8-vcds-vag-com-mods%2F4914-automatically-fold-mirrors-upon-locking.html&v=1&iid=5a7e0c001e056dc9&opt=true&out=https%3A%2F%2Fwww.pjatr.com%2Ft%2F1-790-43737-790%3Furl%3Dhttp%253A%252F%252Fwww.trainz.com%252F p-442835-tamiya-74090-fine-drill-bit-02mm.aspx&ref=https%3A%2F%2Fwww.google.com%2F&title=Automatically%20Fold%20Mirrors%20Upon%20Lock ing%20-%20Audi%20Q3%20Forum&txt=%3Cspan%3EBit%20%3C%2Fspan%3E%3Cspan%3E0%3C%2F span%3E) is at the far right of the binary string
The old HEX value for this byte was prolly 1C; Binary Value [00011100]
and the NEW HEX (http://i.viglink.com/?key=38915f74271930e6f963d377ea84a39e&insertId=f7e10e1505f5ad12&type=H&exp=60%3ACI1C55A%3A16&libId=k69gf10m0100re3y000DAam6bfgxi&loc=https%3A%2F%2Fwww.audiq3forum.com%2Fforum%2F65 8-vcds-vag-com-mods%2F4914-automatically-fold-mirrors-upon-locking.html&v=1&iid=f7e10e1505f5ad12&opt=true&out=https%3A%2F%2Fwww.amazon.com%2Fdp%2FB07BMCXL5C&ref=https%3A%2F%2Fwww.google.com%2F&title=Automatically%20Fold%20Mirrors%20Upon%20Lock ing%20-%20Audi%20Q3%20Forum&txt=%3Cspan%3ENEW%20%3C%2Fspan%3E%3Cspan%3EHEX%3C% 2Fspan%3E) value should be typed in as 5C; Binary Value [01011100]
Esc or Exit
Transfer Coding
Do It!
[52 - Door Elect. Pass.]
[Coding - 07] -> [Long Coding Helper] -> [Byte 4]
[Bit 6 - Undocumented (1 = active) in Binary String]
=> Change Bit 6 to 1
Note : Bit 0 is at the far right of the binary string
The old HEX value for this byte was prolly 1E; Binary Value [00011110]
and the NEW HEX value should be typed in as 5E; Binary Value [01011110]
Esc or Exit
Transfer Coding