PDA

View Full Version : Peugeot 307 IAW 4mp2.01


matarelec
6th February, 2020, 06:50 PM
Hi mates,
Please i need help with immo off for peugeot 307 motor 2.0 ecu IAW 4mp2.01 with flash 29F200.I have already tried IUD solution but it did not work.
Thanks in advance,
Best regards.
Agilechaveiros
6th February, 2020, 08:31 PM
can i help you with immo off but i believe you will need to correct checksum
systemlinux
7th February, 2020, 12:23 AM
Hi mates,
Please i need help with immo off for peugeot 307 motor 2.0 ecu IAW 4mp2.01 with flash 29F200.I have already tried IUD solution but it did not work.
Thanks in advance,
Best regards.


Test and comment the result






















My collaboration was contribution, give thanks + reputation
matarelec
7th February, 2020, 07:00 PM
Thank you mate for your support,I have already tried that,it is IUD immo off but it does not work,the cars does not start and I can see by live data that ecu is blocked,I hope some other mates may help with a trusted immo off file or a virgin one.
alecsander114
8th February, 2020, 12:40 AM
Hi mates,
Please i need help with immo off for peugeot 307 motor 2.0 ecu IAW 4mp2.01 with flash 29F200.I have already tried IUD solution but it did not work.
Thanks in advance,
Best regards.


Here.
Test and report.
Follow instructions in the archive!

Since last time you were moaning that i did not give you password as i was away. The password is CRC-16 of your username.
matarelec
8th February, 2020, 10:24 AM
mate,when you ask me to calculate the CRC-16 out of my user name you should say first in which type the output should be ...HEX,DEC,OCT BIN...I would leave that for somebody else who may have a lot of free time so may may try all the possibilities.
matarelec
8th February, 2020, 01:39 PM
the CRC-16 of matarelec is 0xA386 and it does not work,let other members correct me if I am wrong.
systemlinux
8th February, 2020, 01:49 PM
why don't you virginize the bsi? , you use the same pincode with diagbox or pp2000 to co-appear everything again.
alecsander114
8th February, 2020, 01:56 PM
the CRC-16 of matarelec is 0xA386 and it does not work,let other members correct me if I am wrong.
CRC 16 IBM IS CORRECT
CRC 16 MODBUS IS : 8C53
You only had 32 variants to try...
Don`t be lazy :))
matarelec
8th February, 2020, 02:14 PM
forget it..
matarelec
17th February, 2020, 10:31 AM
Hi mate,
I have tested your file but I am sorry it did not work,I had to use a good ecu dump ,virgin bsi and program a new transponder.
Thanks anyway.
mnem
18th February, 2020, 09:30 PM
My friend, I have faced this type before and researched a lot, and I did not come up with a solution. I think there is no solution but to re-encode