need pinout for 2014 Accord SRS Unit 77960-t2a-a020-m4

[borshch]

hello all, I need pinout for:
2014 honda Accord,
SRS Unit # 77960-t2a-a020-m4.
need 12V, GND and K-line
to check DTC codes with scanner on the bench.

[PSAcars]

Hello to all. This is only power, that is what I have.

[slick_dick]

here try this, not sure if yours is upside down

br

slick

[borshch]

Hello to all. This is only power, that is what I have.

thank you but I'm not looking for pinout to connect to MCU on circuit board but to connect a scanner to the SRS unit by pins

[borshch]

here try this, not sure if yours is upside down

br

slick

thank you, but as you can see in my photo the pin in your diagram is missing in the srs unit that i posted a photo of

[slick_dick]

Its time to go to spec-savers then for me!!!

[borshch]

Its time to go to spec-savers then for me!!!

what do you mean ?

[ReverseFlash]

Here you go. Also if it doesn't work, make sure you put 120 ohm resistor on can h and l.