Hello can someone help me calculate EIS pin for this Mercedes w208

[Nicolas13007]

Fault code P 1570 after keys reprog and calculate with CGDI MB car start but cut , do i need to do a resync ?
Here the dump from EIS
P 1570 = immo problem

[brend]

No pin in eis.

[Nicolas13007]

sorry mate i expressed my self poorly i need pin for keys program

[brend]

From first post dump look like coctail and wrong size!

Load good eeprom dump from eis , for check calcalated key's.

[Nicolas13007]

This was read by CGDI programmer , it calculated a code with wich i programed the key , eis lock and unlock the steering lock , the car start and cut , do you think there is a immo problem or a sync problem ?

[brend]

Look ecu autorization status.

[Shmortz]

Fault code P 1570 after keys reprog and calculate with CGDI MB car start but cut , do i need to do a resync ?
Here the dump from EIS
P 1570 = immo problem

this is not the data from EIS, this file is with data collected to upload in CGDI server for compute password.

[Nicolas13007]

Problem solved i made sync to the ecu and it works the code calculated by CGDI is good thank you for your help