PDA

View Full Version : Vw T4 Immo 3 questions.



kon10
11th February, 2020, 02:05 AM
Hi, i have a Vw T4 Caravelle 2.5L petrol from 2003 with simos 3.5 ECU, this have a external IMMO 3 box, my problem is i want to have a newer cluster from a 2003 passat with canbus and the newer clusters have the IMMO 3 Build in. I have tried to adapt it to the ecu but no luck.
Is this even possible to do?
I have new keys for the new cluster and i have wired the IMMO Reader to the cluster pins and i have confirmed it reads the key.
But i cannot program the keys as it is now, And i have a EPC light on the dash and a fault code for this, Is this because it isnt coded to ECU?
And if i remove the IMMO 3 box do i need to bypass connections to have communication to ECU again?
And is it possible to change the fuel tank volume in cluster eeprom so it matches the T4 instead of the passat?

Do anybody have any suggestion?

Regards.

brend
11th February, 2020, 09:18 AM
Same people just amazing!........689613.
Where did you come from such?

kiszka
11th February, 2020, 01:52 PM
Hi, i have a Vw T4 2.5L petrol from 2003 with simos 3.5 ECU, this have a external IMMO 3 box, my problem is i want to have a newer cluster from a 2003 passat with canbus and the newer clusters have the IMMO 3 Build in. I have tried to adapt it to the ecu but no luck.
Is this even possible to do?
I have new keys for the new cluster and i have wired the IMMO Reader to the cluster pins and i have confirmed it reads the key.
But i cannot program the keys as it is now, And i have a EPC light on the dash and a fault code for this, Is this because it isnt coded to ECU?
And if i remove the IMMO 3 box do i need to bypass connections to have communication to ECU again?
And is it possible to change the fuel tank volume in cluster eeprom so it matches the T4 instead of the passat?

Do anybody have any suggestion?

Regards.
share eeprom readings for both meters

EPC Electronic Power Control
EPC - an indicator light indicating problems with the car, resulting i.a. from electronics defects. It can ignite, e.g. signaling a failure of the stop lamps or the coolant temperature sensor.

kon10
11th February, 2020, 08:11 PM
i have now uploaded bin files for the Caravelle cluster, The passat Cluster and Immobilizer for the Caravelle,
Also is it possible to disable the oil level sensor as it is not needed on the Caravelle?