belge77
11th February, 2020, 07:36 AM
Hello everybody,
i got a 320d e46 150hp touring from a customer.
DDE7789572
Bosch: 0281010565
The car received a new engine and after that the car stayed for a long time outside without being completed.
Now i am the lucky guy to finish them.
because it was always outside, rain came into the old ECU .
Therefore i bought a new ECU, EWS and key kit for this car.
I receive now always the error code "EWS Interface error" from the DDE.
DME/EWS adaptation with BMW Scanner v1.4 or INPA works.
Cable between EWS and DDE is ok
12v an Grounds are ok on the EWS
Key is enabled from the ews
No Error code in the EWS.
But the car will not start!
Can there be a problem with the VIN or different Kmīs which are programmed in the used EWS/DME/KEY-Kit?
Can anybody give me a solution for immo off, EWS Repair or other solution?
I canīt find any immo off solution.
I would also pay for a solution if it works.
Thanks in adavance.
i got a 320d e46 150hp touring from a customer.
DDE7789572
Bosch: 0281010565
The car received a new engine and after that the car stayed for a long time outside without being completed.
Now i am the lucky guy to finish them.
because it was always outside, rain came into the old ECU .
Therefore i bought a new ECU, EWS and key kit for this car.
I receive now always the error code "EWS Interface error" from the DDE.
DME/EWS adaptation with BMW Scanner v1.4 or INPA works.
Cable between EWS and DDE is ok
12v an Grounds are ok on the EWS
Key is enabled from the ews
No Error code in the EWS.
But the car will not start!
Can there be a problem with the VIN or different Kmīs which are programmed in the used EWS/DME/KEY-Kit?
Can anybody give me a solution for immo off, EWS Repair or other solution?
I canīt find any immo off solution.
I would also pay for a solution if it works.
Thanks in adavance.