BMW F20 35128WT Programmer

[Homer2002]

Hi . I Have F20 Black Panel Cluster 2018 from F20 120I with 35128WT chip in it.
I need to change VIN and 0 KM for retrofit ... Please can you tell me what flash programmer can write 0 KM to 35128WT.
Kind Regards
Homer

[Nicolas9]

you can't erase it.

use the search to find out what else you can do

[johnny s]

Use xhorse programmer and their new 35160 eep

[mikkhh]

35128WT erase is no problem with the correct tools...

[johnny s]

Sorry. I have missread. I tought he meant 35160 eep.

[Nicolas9]

Sorry. I have missread. I tought he meant 35160 eep.

haha i also misread!

yes, 35128wt can be programmed.

[Homer2002]

Ok. Thank you. What Tool / Programmer I need for 35128WT ?

[BYTES]

Interested also who can help me do these eeproms

[jomberykaso]

Interested also who can help me do these eeproms

do you mean edit mileage on these eeproms?

[johnny s]

Dp4, smok,....

[brend]

Not all 35128 possible rewrite.



35128WT erase is no problem with the correct tools...

[AvechuchoAxel]

What is the recommended one tool you mention?
I have Vvdi - R27- MDP
Cant erase 35128 WT

Any trick or heads up ?
Thanks

[jomberykaso]

Use New eeprom.... The best solution

[AvechuchoAxel]

I just did this... I read the original 35128WT, then write back into emulator and then ERASED INCREMENTAL.
Followed by changing mileage.

Compared files with WinHex and both match length and content except 00 10

[alonedark]

Can do white https://www.mte.net/35080-m35080-35160-eeprom-eraser

[atomiczen]

people who wrote "yes i can erase" "yes buy a new eeprom and it works" already did it? have you ever work on a F series 2015+ with 35160wt and 35128wt? i don't think.
don't reply on a thread if you don't really know what you are telling.


Can do white https://www.mte.net/35080-m35080-35160-eeprom-eraser
no it can't erase 35160wt, only 160d0wq founded on older cluster.



Use New eeprom.... The best solution
yes, best solution for have a red dot near mileage. 35160wt have unique id programmed on micro, can't be changed, and cannot be erased.



Dp4, smok,....
smok don't support new bmw. only very older cas3 model, and badly also.
dp4, eeprom programmer work on 160d0wq only, so old 2012 model.



35128WT erase is no problem with the correct tools...
let me know which tool can erase it F20 35128wt. Let us know which are the correct tools.
don't try too hard, I suggest it, they don't exist yet.

[chavita]

You are right my friend. Lot of people just giving fake opinions and unreal solutions. Honestly best its make a hard find before give false solutions. Regards

[brend]

...............clear.................

[elecautocr]

I just did this... I read the original 35128WT, then write back into emulator and then ERASED INCREMENTAL.
Followed by changing mileage.

Compared files with WinHex and both match length and content except 00 10

Hello Axel:

Can you tell me which emulator you used ?

Thanks

[AvechuchoAxel]

I bought emulator from xhorse. Late answer is better than never... :courage:

[Fec001]

Agree with atomiczen , for erase in m35128 increment area no exist tool today!




About m35128.
Same new bmw dash not all use for km increment area and for this no need eraiser or emul .

AFAIK 35128wt type Instruments has 2 types. "V1" what uses increment area for km and other "V2" what not. So if I'm correct "V2" can be done without any problem, with any programmer what can do 35128 eprom, because km is not in increment area and no need to erase. Please correct me if I'm wrong.

[johnny s]

AFAIK 35128wt type Instruments has 2 types. "V1" what uses increment area for km and other "V2" what not. So if I'm correct "V2" can be done without any problem, with any programmer what can do 35128 eprom, because km is not in increment area and no need to erase. Please correct me if I'm wrong.

You are correct. I have done many off V2 with Dp4, just like I wrote before. For V1 you need to use emulator

[Fec001]

You are correct. I have done many off V2 with Dp4, just like I wrote before. For V1 you need to use emulator

Or switch off eeprom ID check in IC.
Anyway, any hint or solution how can we know what version the dash uses, V1 or V2? Without read eeprom and check dump?

[brend]

Or switch off eeprom ID check in IC.
Anyway, any hint or solution how can we know what version the dash uses, V1 or V2? Without read eeprom and check dump?

about 35128.....
Swich off id not solve work with increment.

[Fec001]

about 35128.....
Swich off id not solve work with increment.

Yep, thats right. I realized after post it.....

[CARPARTS]

Or switch off eeprom ID check in IC.
Anyway, any hint or solution how can we know what version the dash uses, V1 or V2? Without read eeprom and check dump?

switch off ID.... you do this in the eeprom or in micro ?

[Fec001]

switch off ID.... you do this in the eeprom or in micro ?

It"s done in micro flash I think.

[brend]

switch off ID.... you do this in the eeprom or in micro ?

Of id reflash away ,so.......that's mean flash.
And only need also if original data (eep+id) is missing or broken .

[CARPARTS]

Of id reflash away ,so.......that's mean flash.
And only need also if original data (eep+id) is missing or broken .

you know which bytes (address) and how to modify in the flash ?