PDA

View Full Version : cold start audi A4 BLB bosch EDC16U31



antoniomx
12th February, 2020, 07:02 PM
hi. This car has bad start when cold... But okay when hot... Can someone fix this?

naskochipa
12th February, 2020, 07:07 PM
hi. This car has bad start when cold... But okay when hot... Can someone fix this?

Thanks and Reputation

Pass-PM

Test and Reputation

antoniomx
13th February, 2020, 01:12 PM
It starts a little better but still fails cold. some more solution for software

stanislav georgiev
14th February, 2020, 05:36 PM
Most likely you will need to make a hardware repair decision, not everything is resolved by clicking the keyboard

dehacko
14th February, 2020, 09:46 PM
diesel returns to back
solution: change all the rubber bands to PD injector
;)

brmservice
14th February, 2020, 09:56 PM
also log engine rpm in start stage (starter rpm). if low will not start easy....

flag
14th February, 2020, 10:03 PM
yes antoniomx (https://www.digital-kaos.co.uk/forums/member.php/614071-antoniomx)
has right, i had 3-4 times this problem, and solved, when is cold the car start very hard, if disconnect temperature sensor the car start very easy ( symptoms same as hotstart ), i solved by software

brmservice
14th February, 2020, 10:10 PM
I think that ancient museum audi have 4 pin prehistoric dual ECT , one for the ecu and the other for the dash. they fail one or another , maybe ECU didn`t receive the temp values.... easy to check in PID

.... had this problem on another EDC15 vag crap