View Full Version : Peugeot 307 dtc remove
mally39
12th February, 2020, 09:02 PM
Hi all ,
I need to remove dtc P0190 Peugeot 307 2.0 hdi .
Thank you .
mally39
13th February, 2020, 07:04 AM
Can anyone help ?
bobolin4o
13th February, 2020, 08:06 AM
And how the engine will work without Fuel Rail Pressure Sensor?
Aajii
13th February, 2020, 11:11 AM
P0190 - Fuel pressure sensor circuit malfunction (open circuit?)
In HDI ecu will need fuel rail pressure sensor for fuel pressure regulation.
You should check sensor wiring (5V, gnd, signal to ecu), and if they are ok -> replace sensor.
One possibility is that there is wire broken inside wiring loom.
mally39
13th February, 2020, 12:09 PM
error - signal too high
bobolin4o
13th February, 2020, 12:12 PM
error - signal too high
Find & fix the problem... the engine can't work properly with that malfunction!
Removing errors for the Rail system will not fix the problem.
Aajii
13th February, 2020, 12:28 PM
error - signal too high
Maybe sensor ground missing? and signal is floating... measure wires
mally39
13th February, 2020, 02:21 PM
Thank you all,
there was a broken pin in the ankle
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.