Fiat ducato visteon dcu102 immo

[ziko]

Hi,

I need immo off or virgin, can someone help?
sw: 9663289080
hw: 9661256980

Tnx

[ziko]

......... still need virgin for my sw hw

[esse]

Hi,
here virgin autosync
no pass

[ziko]

I put your file but ecu was dead before I tried to write some files,no communications with diag tool and no check engine lamp on instrument cluster. Read write via boot mode is ok,both via K and CAN

[ziko]

I services tried other set,bsi,ecu,key,still same problem. On bsi shows no communication with engine ecu
Not have pinout for can lines
D701 no communication with engine ecu
D600 error in immo code sent from ecu to bsi
No sending code from engine ecu

SOLVED

[Rasius9112]

Hi Ziko, did you solved fault? Mine Ducati has fault codes, checked for damaged wires all look great, ecu kit also didn't helped, would be great to get some advise, thanks

[ziko]

Was bad wire in ecu u harness, but in mine case not connected diag to ecu

[djbiugi]

Hi...is possible do immo off on Flash on this software? Or must use Julie black version?

[tothzsolt]

hi virgin

test and report

thnx button after send pass pm...........

[centrohifi]

IMMO OFF possible with emulator !!!

[djbiugi]

I not need virgin dump..client lost one key and broke second key..probably,Julie is only solution

[djbiugi]

Is possible apply Julie Green PCB with new documents of website for Black Version?

[djbiugi]

Nobody have try with green PCB of Julie emulator?

[centrohifi]

..latest version original Julie

[sumi1]

Hello. I have the same problem as you. I can read in boot mode with ktag. It does not diagnose the car The check engine light does not come on when you turn on the ignition.Fiat ducato visteon 102 year 2007

[sumi1]

I put your file but ecu was dead before I tried to write some files,no communications with diag tool and no check engine lamp on instrument cluster. Read write via boot mode is ok,both via K and CAN
How did you solve it?