Audi A3 2007, all keys lost.

[j4fme]

Hello.

Audi A3 2007, all keys are lost, avdi/vvdi couldn’t get the CS of the engine ecu by obd. Abrites confdata from instrument cluster is attached, maybe anyone can get 6 byte cs from this? Or i need extract engine ecu and read 93c86? Or somethung else?


Thanks.
_________
06A 906 033 EL - SIMOS71 1.6l 2V
8P0 920 930 S - KOMBIINSTR. VDO H80 0420

[whiskeyman]

cannot see how genuine avdi cannot do this for you

[j4fme]

i cannot see cancer cells, but deny their existence is pointless)
what can do genuine avdi - attached.

[Jimmy07]

Vag helper maybe ?

[j4fme]

if you mean vaghelper by osotech - it work only with BCM eeprom. If something else - i didnt know what is it)

[Jimmy07]

Xhorse Vag helper works on most VAG to pull CS and pin from OBD

[j4fme]

Unfortunately i haven't this tool.

[Jimmy07]

Cheap to buy worth having 👍🏻

[whiskeyman]

is this micronas dump?

[j4fme]

Cheap to buy worth having 

Delivery will be 3 weeks, I would like to resolve the issue a little faster)

is this micronas dump?
maybe its a small part of micronas, but I think not)

[whiskeyman]

Delivery will be 3 weeks, I would like to resolve the issue a little faster)

maybe its a small part of micronas, but I think not)

read micronas on bench and post dump

or with vvdi try put in service and read by obd

need to learn more about the tools you are using

[Jimmy07]

UK sellers would ship next day

[j4fme]

read micronas on bench and post dump

or with vvdi try put in service and read by obd

need to learn more about the tools you are using
vvdi didnt get to put in service without working key. avdi too.

UK sellers would ship next day
I'm non in UK

[qeso705]

Since when vag obd helper support A3 2006-2011? Judging by partnumber of your clusters its dash which should go 100% via obd with correct tools. Best for Fujitsu A3 is uhds xcan.

[j4fme]

Judging by partnumber of your clusters its dash which should go 100% via obd with correct tools. i have only avdi and vvdi for that, if they are incorrect - do i need extract engine ecu and read 93c86 (instead of micronas)? or are there any easier ways?

[Adam871]

Hello.

Audi A3 2007, all keys are lost, avdi/vvdi couldn’t get the CS of the engine ecu by obd. Abrites confdata from instrument cluster is attached, maybe anyone can get 6 byte cs from this? Or i need extract engine ecu and read 93c86? Or somethung else?


Thanks.
_________
06A 906 033 EL - SIMOS71 1.6l 2V
8P0 920 930 S - KOMBIINSTR. VDO H80 0420

If You have vvdi2, open cluster, read eep 24c32, make service mode,go to the car, read thru obd, write thru obd orginal eeprom, and You van make new key with CS...

[j4fme]

i have vvdi1, i do that procedure for another instrument cluster - but it was on NEC. if procedure the same for micronas - then i will do that. Thanks.

[j4fme]

there is a possibility that this is a dashboard with Fujitsu. i have the same as on photo.

[Adam871]

there is a possibility that this is a dashboard with Fujitsu. i have the same as on photo.

That is 8p do micronas is from 2006, so that should be micronas. Do You tryed with service mode?

[exe123]

This dash is Fujitsu before 06/2006. NOT 2007!

Login : 57564
CS: C83C8227907904
MAC: 0F4A43CC

[cypriotboy]

Xhorse Vag helper works on most VAG to pull CS and pin from OBD

Not working on micronas dashes.