BMW 120D E82 DPF/EGR OFF

[chriaran]

Hello mates,

can anyone be kind enough to help me out with the bmw 120d edc17cp02 DPF/EGR AND DTC OFF please. i read via obd2 with kess. is there any problems flashing back with kess, or should I open up ecu and read full??

HW: 08506438
SW: 1037501613
VIN nr.: WBAUR3103AVJ34087
SW ver.:
Spare: 08509515
Engine:
HW Ver.: 0281016110
SW upg.: 08509539
Installation:

thank you very much mates.

[naskochipa]

Hello mates,

can anyone be kind enough to help me out with the bmw 120d edc17cp02 DPF/EGR AND DTC OFF please. i read via obd2 with kess. is there any problems flashing back with kess, or should I open up ecu and read full??

HW: 08506438
SW: 1037501613
VIN nr.: WBAUR3103AVJ34087
SW ver.:
Spare: 08509515
Engine:
HW Ver.: 0281016110
SW upg.: 08509539
Installation:

thank you very much mates.

Have fun

PASS-PM

[chriaran]

THANKS YOU VERY MUCH!!! will test right away and get back to you..

[chriaran]

car will not start after flashing

i took out the ecu before and dump the orignal file with ktag. here is the original working file.

[naskochipa]

You have a problem with your writing tool

bad clone?

[chriaran]

it has been working with no problems... i actually flashed the original file with kess back... and the car started with no problems...

[naskochipa]

Interesting

[naskochipa]

car will not start after flashing

i took out the ecu before and dump the orignal file with ktag. here is the original working file.

Use Ktag to write it and report the password is the same

[chriaran]

ok i will test and will get back to you.

thanks

[flag]

don't do that, better is to write original file, start the car, read ecu with ktag and post here the file, kess is very dangerous for this ecu.

[ivanmihov]

SW: 1037501613 can't be done via obd with kess,use ktag to read and post your file then write again with ktag

[figani]

interesting thread and posts...

"kess don´t work on this ecu"...
"ktag"...

normally that kess works on this kind of ecu, like a charme...
but not this shenzen high tech tools, assembled in the basement...
and painted in green, red or purple...

[momogsm]

car will not start after flashing

i took out the ecu before and dump the orignal file with ktag. here is the original working file.
HI

DPF OFF, EGR OFF, CHECKSUM CORRECTED

WRITE WITH KTAG

PASS IN PM

REPORT BACK

THANKS

[chriaran]

the original file with ktag is posted here above.... i poste both files... obd and ktag dump

[chriaran]

worked like a charm... thanks everybody for the great help!!

[beyincialperen]

password please