vw polo 1.2 tsi dtc remove

[atomiczen]

pStrange issue here
i have a vw polo 1.2tsi year 2014 ecu simos 10.20 03F906070D with P307A, but there's no software find it in dump
tested swiftec, and others
there's someone that know how solve?
here dump

[Babos]

I can to do write me.

[AVDigitale]

WinOLS+damos=dtc off

[atomiczen]

WinOLS+damos=dtc off
still searching, paid for non working solutions at today

[naskochipa]

pStrange issue here
i have a vw polo 1.2tsi year 2014 ecu simos 10.20 03F906070D with P307A, but there's no software find it in dump
tested swiftec, and others
there's someone that know how solve?
here dump


Pass-PM

Test and Report

[vitaliyl]

p307a - need to clean the throttle

[atomiczen]

p307a - need to clean the throttle
made, clean, new adaptation
same problem

[atomiczen]

Pass-PM

Test and Report
Monday,24,February,2020,16:13:13:00001
VCDS Version: Release 17.8.0 Running on Windows 7 x86
www.ross-tech.com (http://www.ross-tech.com)


Address 03: ABS Brakes Labels: 6R0-907-37x-ESP82.clb
Control Module Part Number: 6R0 907 379 AF HW: 6R0 907 379 AF
Component and/or Version: ESP8.2i front H05 0005
Software Coding: 210228E3216E00B6842D14EB84D700401300
Work Shop Code: WSC 02069 000 00000
VCID: 020AB294990F10569C-8056
2 Faults Found:


01314 - Engine Control Module
005 - No or Incorrect Basic Setting / Adaptation
Freeze Frame:
Fault Status: 01100101
Fault Priority: 0
Fault Frequency: 2
Reset counter: 7
Mileage: 141325 km
Time Indication: 0
Date: 2049.14.27
Time: 16:10:37


Freeze Frame:
Hex Value: 0x0007
Hex Value: 0x0002
Hex Value: 0x3224
Hex Value: 0x1496
Hex Value: 0x007F
Hex Value: 0x7F7F
Hex Value: 0x7E00


03306 - Coding Not Valid
008 - Implausible Signal
Freeze Frame:
Fault Status: 01101000
Fault Priority: 0
Fault Frequency: 2
Reset counter: 7
Mileage: 141325 km
Time Indication: 0
Date: 2049.14.27
Time: 16:10:37


Freeze Frame:
Hex Value: 0x0007
Hex Value: 0x0002
Hex Value: 0x3203
Hex Value: 0x2596
Hex Value: 0x007F
Hex Value: 0x7F7F
Hex Value: 0x7E00

Monday,24,February,2020,16:12:44:00001
VCDS Version: Release 17.8.0 Running on Windows 7 x86
www.ross-tech.com


Address 01: Engine Labels: 03F-906-070-CBZ.clb
Control Module Part Number: 03F 906 070 D HW: 03F 906 070 D
Component and/or Version: SIMOS10.20H02 9851
Software Coding: 00000000000000000000
Work Shop Code: WSC 124697 483 00190
ASAM Dataset: EV_ECM12TFS02103F906070D 003015 (VW25)
ROD: EV_ECM12TFS_003_VW25.rod
VCID: 2344D7102AD5F95EB7-8076
2 Faults Found:


6441 - Accelerator Position Sensors (G79) / (G185)
P2138 00 [165] - Implausible Correlation
MIL ON - Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 2
Mileage: 141325 km
Date: 2113.14.27
Time: 16:08:15


Engine speed: 0.00 /min
Normed load value: 0.0 %
Vehicle speed: 0 km/h
Coolant temperature: 42 °C
Intake air temperature: 28 °C
Ambient air pressure: 1010 mbar
Voltage terminal 30: 11.780 V
Unlearning counter according OBD: 40
Engine speed: actual: 0 /min


11014 - Accelerator Position Sensors (G79) / (G185)
P2138 00 [165] - Implausible Correlation
MIL ON - Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 2
Mileage: 141325 km
Date: 2113.14.27
Time: 16:08:15


Engine speed: 0.00 /min
Normed load value: 0.0 %
Vehicle speed: 0 km/h
Coolant temperature: 42 °C
Intake air temperature: 28 °C
Ambient air pressure: 1010 mbar
Voltage terminal 30: 11.780 V
Unlearning counter according OBD: 40




Readiness: 0110 0101

[henriquekc]

test this file and report.

[Maxme]

Hi there how can i read this Ecu? Galetto and Kess V2 failed :(