PDA

View Full Version : Recomend a programmer



obdmaster
7th January, 2010, 11:33 PM
Hi my friends, im auto electrician who needs to get into airbag resetting and im*obiliser de-activation etc.
Can you guys recomend a reasonably priced programmer that will suite my needs. much thanks in advance for all advice and recomendations etc. preferably programmer easy to use.:playingball:
links to sites would be great.

i know i ask alot could you recomend software also. thanks again my friends

eepromRipper
7th January, 2010, 11:49 PM
Message deleted because it was not nice for a beginner.

tachonow
8th January, 2010, 12:03 AM
Upa programmer from elrasoft.com cover 100% devices from srs units. you need alsoo a large database of cleared dumps. or sw to clear crash data.
Forget remmove i+mo. Try to buy tools for key programming. Better for custommers and you.

SadCriss
8th January, 2010, 12:21 AM
The XprogM is a very good tool!!!But the original one...
www.tmt.lt (http://www.tmt.lt)
It is a tool that you can trust.
Beware from the china Xprog and XprogM

B.R

obdmaster
8th January, 2010, 12:26 AM
im*obiliser de-activation? why would you want to be so cruel to cars? I've got no advice for you regarding programmers because you ain't ready to make advancement in your profession.:cobblers:
THATS NOT VERY NICE IS IT???
THIS FORUM IS ABOUT HELP IF YOUR NOT GOING TO HELP DONT POST!!!!!

Jose19
8th January, 2010, 12:28 AM
im*obiliser de-activation? why would you want to be so cruel to cars? I've got no advice for you regarding programmers because you ain't ready to make advancement in your profession.
hello,hello!!!

So why you have try those soft ???
Check what you have said here;
http://www.digital-kaos.co.uk/forums/f68/imm-kil-v1-1-a-68365/

PremierD
8th January, 2010, 12:36 AM
We are on this forum to give help when asked for ..... We even give OPW .. help .. ( after a bit off taking the piss)...So If a Contributer like this Comes on and asks for advice from Anyone who is more experienced in the Fields he is asking about ...We ALL should show some respect and help... Not Rip the piss out of him .....

obdmaster
8th January, 2010, 12:37 AM
Upa programmer from elrasoft.com cover 100% devices from srs units. you need alsoo a large database of cleared dumps. or sw to clear crash data.
Forget remmove i+mo. Try to buy tools for key programming. Better for custommers and you.

I have key programmers etc, but would like to be able to virginise ecu, and remove immobiliser if need be m8

^^TommyTee
8th January, 2010, 12:54 AM
immobiliser de-activation? why would you want to be so cruel to cars? I've got no advice for you regarding programmers because you ain't ready to make advancement in your profession.


so funny ive just looked at your posts and you ask for help from this forum which is fine but too jump in on someones post with a reply like

" I've got no advice for you regarding programmers because you ain't ready to make advancement in your profession"

is not conducive too being helpful and i dont like wisecracks so next time youve got no advice be a good boy and keep it too yalself ok dood?

obdmaster is a good guy so try too be helpful

Yours Gratefully TheFiddler ;)

eepromRipper
8th January, 2010, 06:37 AM
Alright guys AM SORRY about that statement, I guess it was a transferred aggression. don't smoke me out. its a mistake.

I Didn't say it was wrong for him to ask for immo-deactivation, I also asked for immo-off when needed but I only say not for a profession. its a misconception

adam28
8th January, 2010, 08:01 AM
Hi my friends, im auto electrician who needs to get into airbag resetting and im*obiliser de-activation etc.
Can you guys recomend a reasonably priced programmer that will suite my needs. much thanks in advance for all advice and recomendations etc. preferably programmer easy to use.:playingball:
links to sites would be great.

i know i ask alot could you recomend software also. thanks again my friends


UPA is a good place to get the ball rolling mate,and also ETL.
http://www.etlweb.com/?ref=products_programming_tools

Here all prorammers are separate,but very effective.

You may even want to start with something cheap just like this for eeproms Programmers Advanced USB Serial Programmer (http://www.tek-tronics.co.uk/product_info.php?cPath=37&products_id=104)

And when you get the hang of it get a more expensive programmer.

Cheers

SadCriss
8th January, 2010, 11:27 AM
I have key programmers etc, but would like to be able to virginise ecu, and remove im*obiliser if need be m8

Try Abritus tools they work just fine.....

florinyes
8th January, 2010, 07:12 PM
Now that is one help full reply. Cheers Adam28:goodpost:

obdmaster
8th January, 2010, 09:42 PM
upto now its between the xprog-m and the upa usb, does anyone have the upa usb user manual to share please. ive downloaded the xprog-m one from there site much thanks in advance

kareszka
8th January, 2010, 09:55 PM
Hi !
This is upa user manuals.
Best regards.

melcool
9th January, 2010, 05:21 PM
upto now its between the xprog-m and the upa usb, does anyone have the upa usb user manual to share please. ive downloaded the xprog-m one from there site much thanks in advance

first choice UPA...because its a MUST HAVE :viking:

florinyes
10th January, 2010, 02:43 PM
melcool

Do you sell them (are from eralsoft) UPA's? I've seen you recommending them on a few occasion. On the market myself after a good programmer and can't make my mind up..

Ta

melcool
10th January, 2010, 09:53 PM
melcool

Do you sell them (are from eralsoft) UPA's? I've seen you recommending them on a few occasion. On the market myself after a good programmer and can't make my mind up..

Ta

No man I'm not selling UPA but you will see why I'm telling that its a MUST HAVE after you will buy one ...because its a very cheap programmer but very good and it covers... almost... all the chips(serial eeprom and MCU) from a car till now!
And its a good start!

BondzaiBeach
10th January, 2010, 10:28 PM
first choice UPA...because its a MUST HAVE :viking:

Agreed, it is very good...

MAXIMUS1000
11th January, 2010, 12:18 AM
upto now its between the xprog-m and the upa usb, does anyone have the upa usb user manual to share please. ive downloaded the xprog-m one from there site much thanks in advance

upa 100%....good to work
Me and Jose19 have it + others on this forum....
If you need anyhelp just drop a PM and We are here to help you m8...

Cheers
MAXIMUS1000

obdmaster
11th January, 2010, 12:25 AM
Ive gone for a clone xprog-m m8, from ecutool. Price is very good and athorisations. Only time will tell if done the right thing m8, I HOPE SO!!!!!!!!!!

melcool
11th January, 2010, 12:31 AM
Ive gone for a clone xprog-m m8, from ecutool. Price is very good and athorisations. Only time will tell if done the right thing m8, I HOPE SO!!!!!!!!!!

Authorizations are fake at almost all sellers!
Is no a bad choice but I'm very sure that in very quick time you will buy UPA lol

vares
11th January, 2010, 12:35 AM
Please do not forget to inform us what it actually is able to do.:)

obdmaster
11th January, 2010, 12:38 AM
Been talking with few other members on skype, never bought anything crap from ecutool (and ive bought loads of stuff) price was good, thats why went for that. Your probably right though everyone (well most), i will probably buy a upa also, if things go to plan!!!!!

Im sure i will tell you my pitfalls and succeses ( if there are any in due course).

Thanks everyone



P.S VARES dont worry m8, will let everyone know if its good or crap? no bother

vares
11th January, 2010, 12:49 AM
We are waiting for News mate

tachonow
11th January, 2010, 09:10 AM
Xprog-M clone has no authorisation for Micronas and 9s12 secured mcus. This is the only difference between it and upa which is genuine at half price . If you have allready buy it from ecutool which is good suplier but very bad support we are expecting the results on its functions.

obdmaster
11th January, 2010, 05:27 PM
Xprog-M clone has no authorisation for Micronas and 9s12 secured mcus. This is the only difference between it and upa which is genuine at half price . If you have allready buy it from ecutool which is good suplier but very bad support we are expecting the results on its functions.


It was $195, theyve put them up this morning to $215, dont think bad price!

cmario
11th January, 2010, 06:36 PM
Alright guys AM SORRY about that statement, I guess it was a transferred aggression. don't smoke me out. its a mistake.

I Didn't say it was wrong for him to ask for im*o-deactivation, I also asked for im*o-off when needed but I only say not for a profession. its a misconception


How reset interval service with lexus?without lexus?

SadCriss
12th January, 2010, 12:20 AM
It was $195, theyve put them up this morning to $215, dont think bad price!

Price for a clone XprogM is about 50-100 usd and you can not be 100% that you can use it to work or only buy it for the colection.
If you buy an UPA at least you are 100% that you van use it and explore it to maximum and at least you can earn money for a new and more beter programer.

you decide what is better for you we can only advice you.

obdmaster
12th January, 2010, 12:37 AM
Price for a clone XprogM is about 50-100 usd and you can not be 100% that you can use it to work or only buy it for the colection.
If you buy an UPA at least you are 100% that you van use it and explore it to maximum and at least you can earn money for a new and more beter programer.

you decide what is better for you we can only advice you.


You find me a clone xprog-m for 50-100usd m8!

And your advice is appreciated sadcrisis

adam28
12th January, 2010, 10:19 AM
I see the one that obdmaster has bought from ECUTOOL has the HCS12 security bypass Authorization. My clone does not have this.
Is there anyway to get this authorization for my clone?

Cheers

florinyes
13th January, 2010, 09:23 AM
Not sure that is real authorization. Probably more like on paper statements...Eventually obdmaster will get hold of it and may be able to find out? Not that I am an expert but ..common sense.

Regards

fukukum
13th January, 2010, 05:17 PM
good programmer:musicus: bynkaay.com | DSP3, Dataspecial, Datasmart, OBD2, Odometer, ezs, Kwp200, Car Scanner, Cas3 programmer, Benz smart key programmer, Ir programmer, Motorola programmer, cas3, Automotive diagnostic, Eeprom programmer, ezs, Etl, Key code, Hex-can, Airbag (http://www.bynkaay.com/index.jsp)

florinyes
13th January, 2010, 05:35 PM
Anyone else used this people ???

MB STAR PRO (can use with any computer) (http://www.bynkaay.com/productdetails.jsp?PID=809&proname=MB%20STAR%20PRO%20%28can%20use%20with%20an y%20computer%29)

They got top prices but doing a bit of research before I'll order anything. Looking at this star machine..Good price and rus on any laptop. Any thoughts?

Cheers

obdmaster
13th January, 2010, 09:18 PM
Anyone else used this people ???

MB STAR PRO (can use with any computer) (http://www.bynkaay.com/productdetails.jsp?PID=809&proname=MB%20STAR%20PRO%20%28can%20use%20with%20an y%20computer%29)

They got top prices but doing a bit of research before I'll order anything. Looking at this star machine..Good price and rus on any laptop. Any thoughts?

Cheers


Think there part of onestop factory, bought tachopro, and vw airbag crash data resetter. Few years ago now though may of changed m8

PremierD
13th January, 2010, 09:37 PM
Anyone else used this people ???

MB STAR PRO (can use with any computer) (http://www.bynkaay.com/productdetails.jsp?PID=809&proname=MB%20STAR%20PRO%20%28can%20use%20with%20an y%20computer%29)

They got top prices but doing a bit of research before I'll order anything. Looking at this star machine..Good price and rus on any laptop. Any thoughts?

Cheers

I bought vag can commander (a long time ago ) still works although out of date now ... Bought Benz and Bmw readers... No comms... (send it back was the reply) ... still under the bench....(for about three years) ....

400 euros is about the going rate for cloned S**R... although the original would only work on IBM ... Which was no where near as fast as Nkaay recommends you use ...so it's a suck it and see mate .....sorry

florinyes
14th January, 2010, 09:30 AM
I am on the same boat right now with this people:

KeCool Electronics Co., Ltd. - Professional in OBD Diagnostic Tools (http://www.kecool.com/)


had a mvp key machine, no comms just send it back. Lets see hoe it goes..I'll keep you updated.

I rather use my toughbook than a normal laptop (regarding C3 star) so the price is top just need the impulse to go ahead.
I wish I could afford to get all proper tools but allready spent a fortune on things like dec ss2, carman scan, launch, vaux.com and this being all proper tools (not copies)

Cheers

sl4ck
6th February, 2010, 12:27 AM
I want to buy UPA-USB, but i don?t know wich one is the real used in ECU/Airbag automotive from elrasoft:

ELRASOFT Products (http://www.elrasoft.com/index.htm)

there are UPA-USB CAN Bus Analyzer, UPA-USB Logic Analyzer, UUSP (UPA-USB Serial Programmer) and High-Speed USB Module, i don?t know which one to buy.

@obdmaster (http://www.digital-kaos.co.uk/forums/members/84970-obdmaster/)
what x prog version did you bought from ecutool, 4.2 or 4.5?
Price listed includes all authorizations and adapters from both versions?

Need advice
Thanks

melcool
6th February, 2010, 03:51 PM
I want to buy UPA-USB, but i don?t know wich one is the real used in ECU/Airbag automotive from elrasoft:

ELRASOFT Products (http://www.elrasoft.com/index.htm)

there are UPA-USB CAN Bus Analyzer, UPA-USB Logic Analyzer, UUSP (UPA-USB Serial Programmer) and High-Speed USB Module, i don?t know which one to buy.

@obdmaster (http://www.digital-kaos.co.uk/forums/members/84970-obdmaster/)
what x prog version did you bought from ecutool, 4.2 or 4.5?
Price listed includes all authorizations and adapters from both versions?

Need advice
Thanks

For ECU/Airbag automotive buy this!
UUSP (UPA-USB Serial Programmer)

obdmaster
6th February, 2010, 04:10 PM
I want to buy UPA-USB, but i don?t know wich one is the real used in ECU/Airbag automotive from elrasoft:

ELRASOFT Products (http://www.elrasoft.com/index.htm)

there are UPA-USB CAN Bus Analyzer, UPA-USB Logic Analyzer, UUSP (UPA-USB Serial Programmer) and High-Speed USB Module, i don?t know which one to buy.

@obdmaster (http://www.digital-kaos.co.uk/forums/members/84970-obdmaster/)
what x prog version did you bought from ecutool, 4.2 or 4.5?
Price listed includes all authorizations and adapters from both versions?

Need advice
Thanks

Bought the v4.5 m8, they both come with 4.5, i have no idea what the difference is!

teerak2uk
7th February, 2010, 09:02 PM
But would this ELRASOFT Products (http://www.elrasoft.com/uusp.htm) need any other adaptors or does it come as a complete kit


Thanks

ilian_cho
7th February, 2010, 09:12 PM
Loock here www.scorpio-lk.com (http://www.scorpio-lk.com)
This programer is universal. Motorola(also locked 908 4j74y and etc).Serial eproms(for example support fully acsess to 95080),TMS,ST6xxxx,FLASH(for removing immo in some ecu you must read and whrite flash memmory)This is not everything, with programer are included car radio unlock soft, dash soft, immo soft, air bag crash clean soft with very pictures. Also key maker and key learning( for example NATS5 for kline) There a mani socets for chips(mcu, flash.............).Lock this.

AutoX4242
7th February, 2010, 10:51 PM
We have the scorpio Omega kit, it's quite comprehensive and comes with most adaptors (not all)

We also have the UPA-USB from Elrasoft, this does not come with any adaptors (you get what you see in the picture on the site - just the interface), but you can quite easily make up your own lead or buy the ones with the gripper attachments to connect to the legs of the chip.

At a quarter of the price of the Omega, I think the UPA is far better value

hth...

sl4ck
7th February, 2010, 11:37 PM
I have ordered UPA-USB yesterday, let's see how it can surprise me :eating:

obdmaster
7th February, 2010, 11:41 PM
We have the scorpio Omega kit, it's quite comprehensive and comes with most adaptors (not all)

We also have the UPA-USB from Elrasoft, this does not come with any adaptors (you get what you see in the picture on the site - just the interface), but you can quite easily make up your own lead or buy the ones with the gripper attachments to connect to the legs of the chip.

At a quarter of the price of the Omega, I think the UPA is far better value

hth...

Where do you get the proper adaptors from m8 for upa-usb elrasoft?

sl4ck
7th February, 2010, 11:54 PM
Where do you get the proper adaptors from m8 for upa-usb elrasoft?

I think he is talking about this m8

3M SOIC / SOP 8 WAY Test Clips (+ISP CABLE) AMBIT 256! on eBay (end time 14-Feb-10 14:39:12 GMT) (http://cgi.ebay.co.uk/3M-SOIC-SOP-8-WAY-Test-Clips-ISP-CABLE-AMBIT-256_W0QQitemZ110481773159QQcmdZViewItemQQptZLH_Def aultDomain_3?hash=item19b93a1267)

3M SOIC / SOP 16 WAY Test Clips +ISP CABLE // AMBIT 300 on eBay (end time 24-Feb-10 11:35:15 GMT) (http://cgi.ebay.co.uk/3M-SOIC-SOP-16-WAY-Test-Clips-ISP-CABLE-AMBIT-300_W0QQitemZ120522584547QQcmdZViewItemQQptZLH_Def aultDomain_3?hash=item1c0fb4b1e3)

ilian_cho
8th February, 2010, 08:01 AM
Replay to AUTOX4242:
For the price you are whrite. I,m from Bulgaria. And upa and Omega made in Bulgaria. I have two one. With omega you have every pictures for conection (dash, immo , car radio, airbag). This i mean. For example i upload same. Omega have ISP adapter, upa not. I tryed to read secured 908 with uba but no cucses. With omega i have no problem. Also 35080 (even v6) in dash(bmw, opel.........). Omega have every adapters who need, upa not. But the price is :eek:

AutoX4242
8th February, 2010, 09:02 AM
I use this with everything

WTS - Products (http://www.warwickts.com/product_Model+WLX016++Micro+Hook+Assembly.html)

just cut the plug off and solder the wires on to a standard plug for the UPA

baccouche123
7th April, 2010, 12:24 PM
hi help me i need a dump for dashe fort opel corsa d whith eprom 35080 thinks