View Full Version : FORD EDC16C34 Speed Limiter
naskochipa
23rd February, 2020, 08:01 PM
Can anyone make a limit of 130 km I tried a lot of decisions and I come to the conclusion that maybe the speed limit is in eeproma but I still decided to ask address 1E8D02 and the switch to address 1E8D00 does not work if there is a solution I will be grateful
Pepesoft
23rd February, 2020, 08:21 PM
I usually change the speed limiter on those cars with delphi/autocom/wow clone. Few cases has been that need some ori tool like i have Bosch KTS560 with online support.
Never had to change it in the ecu dump.
Some cars though save the limiter in dash like mercedes maybe in this case is the same?
naskochipa
23rd February, 2020, 09:31 PM
I already tried with the diagnostic tool did not work
momogsm
23rd February, 2020, 10:51 PM
HI
VMAX OFF, CHECKSUM CORRECTED
PASS IN PM
REPORT BACK
THANKS
naskochipa
24th February, 2020, 08:45 AM
HI
VMAX OFF, CHECKSUM CORRECTED
PASS IN PM
REPORT BACK
THANKS
You don't read well what I wrote, these addresses don't work and I don't want to remove the limiter to do it at 130kmh
momogsm
24th February, 2020, 10:16 AM
You don't read well what I wrote, these addresses don't work and I don't want to remove the limiter to do it at 130kmh
HI
OHH MY MISTAKE, SORRY FOR THAT, BUT AS I SEE IN YOUR FILE THE VMAX IS ALREADY LIMITED AT 130KMH, ARE YOU SURE THAT IS THE ORIGINAL FILE ?, BECAUSE I THINK IT NOT
REPORT BACK
THANKS
naskochipa
24th February, 2020, 10:34 AM
This is the file I made with vmax 130kmh and the addresses that I changed and they don't work
icezero2010
24th February, 2020, 12:39 PM
This is the file I made with vmax 130kmh and the addresses that I changed and they don't work
have u test 1EAF8A?
naskochipa
24th February, 2020, 02:26 PM
have u test 1EAF8A?
Test not work :(
icezero2010
24th February, 2020, 02:27 PM
Can u please upload a ori file ?
Gesendet von iPhone mit Tapatalk
icezero2010
24th February, 2020, 03:18 PM
Can anyone make a limit of 130 km I tried a lot of decisions and I come to the conclusion that maybe the speed limit is in eeproma but I still decided to ask address 1E8D02 and the switch to address 1E8D00 does not work if there is a solution I will be grateful
PrpCtl_swtSpdLimType_C u must find this switch and set to one than work your limiter
oh sorry i see u test this but is the adress really correct ?
there i not sure i have no good damos in this area
thats the problem
morgano
24th February, 2020, 05:49 PM
And 0x1E8D06 ? Seems more like a topped up SL, try lowering it.
icezero2010
24th February, 2020, 06:03 PM
And 0x1E8D06 ? Seems more like a topped up SL, try lowering it.
Yes but exact before 2 switch 1 is to activate limiter and the second is eeprom or flash
Gesendet von iPhone mit Tapatalk
naskochipa
24th February, 2020, 06:59 PM
Can u please upload a ori file ?
Gesendet von iPhone mit Tapatalk
Here is the file I downloaded from the car
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.