Clio IV 2018 all key lost

[HeXeN]

Clio IV 2018 all key lost
Possible ? Anybody tested ?

[Manta1600]

OBD Star maybe

[p1et]

Possible with Renault Ecu Tool, Abrites or Zed-Full. Need to read D-Flash from card reader on table and then program via OBD

Sent from my DUB-LX1 using Tapatalk

[topclef]

AVDI using Renault RR018 online , work perfect not need to remove card reader .

[HeXeN]

Possible with Renault Ecu Tool, Abrites or Zed-Full. Need to read D-Flash from card reader on table and then program via OBD

Sent from my DUB-LX1 using Tapatalk
What is the procedure with dump? "Enable read pin (2015+)" ?

[p1et]

What is the procedure with dump? "Enable read pin (2015+)" ?If you have 2015+ with one working card, then you can use this function to make procedure of programming new card, no any reflashing. But if AKL with ecu tool you need remove card reader. Removing card reader in Clio 4 is 1 minute job

Sent from my DUB-LX1 using Tapatalk

[TERMINATOR1000]

Clio IV 2018 all key lost
Possible ? Anybody tested ?

hello
NO , you need an pre-coded card , pre-coded with ISK , ISK is obtain after VIRGINIZE the HFM ( AMAZING BUG you can read it AFTER ! )
After you need to learn HFM with precoded CARD ... IF you know how to pre-code AES virgin card YOU CAN
The better is to read HFM dataFlah & program new card ( vvdi prog need 7 wire ) with R.E.T ( 40 minutes job )

[TERMINATOR1000]

What is the procedure with dump? "Enable read pin (2015+)" ?

NO it's ONLY if you have pre-coded card ( or working card ! )
1° Read Memory data of MCU
2° OPEN dump with R.E.T
3° Conect OBD2 to the car & read identification
>>>> ISK + PIN code appear in screen >> program the totally virgin card

[ZINE DDINE]

HI
LONSDOR

[jihed aissa]

i did it before with vvdi prog read dflash and program it after with avdi or x300 dp ...

[TERMINATOR1000]

HI
LONSDOR

no yet , this tool Read & Write d-flash by OBD2 (long & risky method when write error ! ) , the good method need 1 minutes ! No flash HFM . No risk .


https://www.youtube.com/watch?v=NeV3F3wU3zA&t=1s

[HeXeN]

YES :) I understand and I can read flash of HFM, but where is procedure in Renault Ecu Tool to upload this flash for programming??? What is step by step? I cant see anything except obd programming.
I have also obdstar so good to know it can do with flash uploaded into tool.

edit: ok , now I know. first dump, then identification. There was no info inside tool so needed to confirm.

[rob h]

Connect to car by obd, using ret, then the options Will appear,
You wil then load hfm file, that you Read with programmer.

Works realy well,

Have not tried obdstar, i asume that you Will need to load hfm dump, in the obdstar folder,

[p1et]

HI
LONSDOR

Have you actually tried and succeed? Back in July I tried add extra card by OBD and Lonsdor damaged D_Flash during procedure. After car was recovered with many headaches, I tried to add card one more time, this time using D_Flash .bin file and couldnt done it. Reprogramming original card was okay but always error when programming blank. Same blank card programmed with AVDI no problem.

[auto techniek]

How good is this tool?

Did you use it?


i did it before with vvdi prog read dflash and program it after with avdi or x300 dp ...