PDA

View Full Version : SID 208 PSA


esse
1st March, 2020, 11:34 AM
Hi,
i tried to read sid 208 PSA with ktag (not clone)
and can t
external power 14V 5A
what i need to do?
thanks for help
figani
1st March, 2020, 12:00 PM
As I know...
Ktag clone can't read/write psa sid 208...
esse
1st March, 2020, 12:20 PM
ktag original not clone
figani
1st March, 2020, 01:44 PM
Sorry, saw word clone and head blocked...
I set up on 10A / 13V with the thicker cable...
Even ecu id not working...?
allcarsdiag
1st March, 2020, 02:28 PM
MagPro read and write this ecu...
esse
1st March, 2020, 03:15 PM
Sorry, saw word clone and head blocked...
I set up on 10A / 13V with the thicker cable...
Even ecu id not working...?
no every time say connection error
morgano
1st March, 2020, 08:31 PM
no every time say connection error

And all connections are good? Does it still work on the car?
esse
1st March, 2020, 10:44 PM
And all connections are good? Does it still work on the car?
Hi Morgano,
yes all connection are good and no com in car but with used ecu same problem with ktag
tomorrow i ll try at work with 10A
thanks for help
esse
1st March, 2020, 10:45 PM
before reading it at ktag no communication in the car
morgano
2nd March, 2020, 12:10 AM
That sounds as fried ecu :(
figani
2nd March, 2020, 09:27 AM
before reading it at ktag no communication in the car


no communication in car by Ktag/obd...?
or no generally no communication by obd scanner...?

I read a lot of them, sometimes no communication by Ktag/obd, but on bench it worked...

I donīt know if itīs a option for you, but pcmflash has a boot option on this kind of ecu with module 53...
esse
2nd March, 2020, 01:48 PM
Hi,
no tried with ktag obd
no comm with scanner Gutmann and diagbox
thanks for help