Hyunday i20 DCM3.7AP ktag ecu not identified

[spiridonas]

Hi guys please i tried to read via ktag 5.017 clone the Hyunday i20 DCM3.7AP SH72544
but i take this message : ecu not identified

Please can help me anyone ?
Many thanks in advance

[Fronzies]

After read, car start? you tried with the other protocols? have you checked the micro and the right one?

[spiridonas]

After read, car start? you tried with the other protocols? have you checked the micro and the right one?
The car is away, i read as ssangyong, here the file but i don't know if the protocol P524 is correct for this ecu.

[AVDigitale]

how you read this ecu in JTAG or how ?

[spiridonas]

how you read this ecu in JTAG or how ?

Yes via Jtag, please can anyone remove this fault code error : P2032 Exhaust Gas Temperature Sensor Circuit Low
Thanks

[Fronzies]

The car is away, i read as ssangyong, here the file but i don't know if the protocol P524 is correct for this ecu.if you still can't read, try the protocol (P520) if not even read try the others

[spiridonas]

if you still can't read, try the protocol (P520) if not even read try the others
i tried all protocols for this ecu when finish the reading i take message "checksum error" only with P524 finish the reading and saved the dump without any error message.

[Fronzies]

i tried all protocols for this ecu when finish the reading i take message "checksum error" only with P524 finish the reading and saved the dump without any error message.
ktag is problem...

[figani]

ktag is problem...

why should ktag be the problem...?
can you maybe explain...?

[Fronzies]

why should ktag be the problem...?
can you maybe explain...?it happened to me on other ecu also ... as if it were a bug of the k clone tag.