Audi A4 B7 EDC15VM+ RB8 VP44 PSG5 replace

[motor25]

Hi to all! I have the problem Audi A4 B7 EDC15VM+ Dash RB8 pump VP44 PSG5, im replace VP44 pump and need immo syncro psg5 and EDC15VM+, but cant do it, read login from dashboard (read carprog), then go ENGINE - LOGIN- ENTER LOGIN-LOGIN NOT CORRECT. May be some tell me procedure immo syncro psg5 and EDC15VM+ Audi A4 B7 2006?

[rch11]

You must read login dash and ecu.

[rch11]

Log in to ecu (pin ecu) and channel 50 enter login dash

[kiszka]

You must read login dash and ecu.

Log in to ecu (pin ecu) and channel 50 enter login dash
You could not write this in one post
there is such a button as, edit post

[motor25]

Ok, today im try to read eeprom from ECU, extract pin, and do as you say, then report.

[rch11]

Read OBD, vag comander

[motor25]

Vag commander 1.4 can do it by Obd? Not need open ecu and desolder eeprom?

[rch11]

Yes...........

[brend]

If you replace only psg5 unough go to ecu enter ecu login then adaptation and put same login and job done!

If login not work probably safe time active.Need turn ignition on and wait 15-25 min and then try agane.

For check login better load dump from ecu , probably you have not right login if you still have with this problem.

Different login from ecu or from dash need only if replace ecu or dash not pump!

[motor25]

Im desolder and read eeprom edc15vm+, can you help get PIN?

[kiszka]

Im desolder and read eeprom edc15vm+, can you help get PIN?
Test 00439

[dimon9555]

1)The engine ECU will not accept the PIN code because the lock is turned on in it
2)The pin code does not attach the pump because it is A4 B7
завести можно Can Hacker например

[motor25]

Test 00439

PIN not work.

[rafal]

PIN not work.

login is correct.................
00439
421224 km