Opel ASTRA H 1.6 - Z16XEP - Lamba OFF

[pacurar]

Hello, please if you can do Lambda off, ecu MT35E.
Thanks.

[pacurar]

there are no solutions to my problem

[brmservice]

what dtc you have?

[pacurar]

the heating part of the sensor does not work, I changed the sensor, I checked the wires everything is ok but the heating is inactive permanently.

[pack3r]

Hi i can help but tell me how do you read and will try to write flash ?

[pacurar]

I read flash with carprog and I will write with TL866

[volorucinski]

Hello, don't you wanna try coding another ecu instead? I have 2. I think what you're about to do will not work.

[DiegoStud]

Fix your car.
Do folks not check fuses these days?

[pacurar]

Which fuses should be checked? is the heating circuit of the lambda probe permanently without voltage?

[brmservice]

do you have P0135?

[sebage]

How did you check the wires and they are ok, if you did not know what safety to get?
On pin 1 (red wire with blue stripe) from both lambda sensor you must have + 12V out of 26 (10A).
The other 3 wires on each lambda sensor, go directly to the ECU only (lambda 1 into the ECU in the M jack on pins 42, 44, 52). (lambda 2 in ECU in jack M on pins 6, 61, 53).

[volorucinski]

That is a common problem on astra g and h. Fuse that gives +12V at lambdas heater and canister valve. If I remember, it's a 15A fuse. But this man Marius here has only the heater gone on Lambda 1. He said wires, connectors, fuses are alll ok. Tried with new oem lambda and the error remains the same.

Marius, take a look here, might help you

https://www.700r4transmissionhq.com/p0135-opel-astra/

[LaraVAG]

hehehe he want file with sonda off,, not your tips what can be wrong

File for you sonda Lambda 100% off with CRC ok.

[brmservice]

main lambda mate? this will force open loop

[volorucinski]

main lambda mate? this will force open loop

He already got one opened. Beter try to change the ecu, in his case...