View Full Version : Siemens NCDR 1100
jenik6
10th March, 2020, 04:44 PM
Hello. Tell me the code or completely remove the code with this radio.Dump attached. Counted am29lv60db which is closer to the transistor
shooting
10th March, 2020, 05:13 PM
Hello. Tell me the code or completely remove the code with this radio.Dump attached. Counted am29lv60db which is closer to the transistor
Pairing code in the Display not the radio
wbr
carradio2001
10th March, 2020, 09:12 PM
Code 5785
Regards,
jenik6
10th March, 2020, 09:50 PM
maybe there is a clean dump to this radio without code?
carradio2001
10th March, 2020, 09:58 PM
Only way is to make virgin and prepare to married with the others from bus: Telematic, Display, CD Changer if they are virgin or have the same security code (known).
Carradioo2001.
shooting
11th March, 2020, 08:39 AM
Code 5785
Regards,
This is not pairing code if radio is new to the car... Pairing code in Display ;)
wbr
jenik6
11th March, 2020, 10:54 AM
I made it worse. So I’m looking for a clean firmware for the radio tape recorder untied from another car ...... as I understand it, if the radio tape recorder is not untied from the previous car, it cannot be tied to a new one.
shooting
11th March, 2020, 11:35 AM
I made it worse. So I’m looking for a clean firmware for the radio tape recorder untied from another car ...... as I understand it, if the radio tape recorder is not untied from the previous car, it cannot be tied to a new one.
Wrong, you can pair it using Tech2 but you need display dump for pairing PIN.
wbr
jenik6
13th March, 2020, 04:29 PM
I do not have tech2, there is only opcom. to bind the radio to the car, you first need to untie it from the previous car. because if you don’t do this with a new car, you won’t be able to bind it .... here you need an empty dump that does not already contain a car code
shooting
13th March, 2020, 05:15 PM
I do not have tech2, there is only opcom. to bind the radio to the car, you first need to untie it from the previous car. because if you don’t do this with a new car, you won’t be able to bind it .... here you need an empty dump that does not already contain a car code
That is correct for OPCOM, but you can pair if you have full TECH2 or replace all 3 flash dumps in the radio...
wbr
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.