PDA

View Full Version : Benz SL600 cloning


teerak2uk
11th March, 2020, 09:23 PM
Mercedes Benz SL600 2008 does anyone know if these are straight forward to clone?https://uploads.tapatalk-cdn.com/20200311/bb1fdb5c58fe68a7839dacad1d54a56f.jpg
LaraVAG
11th March, 2020, 09:32 PM
connect to any tool by boot and check if exist OTP area. if yes contact me.
NASTASE
12th March, 2020, 10:11 AM
Flash stored in two 29f400.Must read in boot mode,
Real eeprom is 35P08, also two.Eeprom read is desolder job.
Anyway easy to clone.
No OTP, just an usual 29F400,but safety date are stored in a protected are at begin of flash, can read and write only in boot mode.
teerak2uk
12th March, 2020, 11:03 AM
Flash stored in two 29f400.Must read in boot mode,
Real eeprom is 35P08, also two.Eeprom read is desolder job.
Anyway easy to clone.
No OTP, just an usual 29F400,but safety date are stored in a protected are at begin of flash, can read and write only in boot mode.So eeprom swap alone is not enough ?
NASTASE
12th March, 2020, 02:30 PM
So eeprom swap alone is not enough ?
Most of 29f400 contain also car safety data.