View Full Version : BMW E60 3.0d help dpf off edc16cp35
misiujakub
13th March, 2020, 11:40 AM
Hi,
I need DPF off BMW E60 3.0d edc 16cp35 0281013500 bmw 7803369 flash BDM this ecu.
DPF broken and message error p4020, p4d03, p41ba.
Thanks for all help:tears_of_joy::tears_of_joy:
Mooti
13th March, 2020, 12:13 PM
Test And Report
Pass PM
Mooti
13th March, 2020, 12:14 PM
clear the message box
misiujakub
13th March, 2020, 12:19 PM
Cleared sorry
momogsm
13th March, 2020, 12:33 PM
HI
DPF OFF, CHECKSUM CORRECTED
PASS IN PM
REPORT BACK
THANKS
misiujakub
13th March, 2020, 03:09 PM
Not working correct
chafik4051
13th March, 2020, 03:36 PM
try and report,
pass in pm.
momogsm
13th March, 2020, 03:48 PM
Not working correct
HI
DO YOU TRY MY FILE ? WHAT PROBLEM DO YOU HAVE ?
REPORT BACK
THANKS
misiujakub
13th March, 2020, 04:23 PM
ECU message error p4020, p4d03, p41ba in ride 50 km, all sensor is Connect .
misiujakub
16th March, 2020, 10:44 AM
I off dpf in ADS, this file ok ?
Lambda1
16th March, 2020, 10:50 AM
With ori file:
- Delete adaptions,
- Delete error memory,
Flash dpf off file. Run.
misiujakub
16th March, 2020, 11:30 AM
With ori file:
- Delete adaptions,
- Delete error memory,
Flash dpf off file. Run.
BMW not working this flash. :(
does not start the engine.
Mooti
16th March, 2020, 12:14 PM
Convert checksums, so don't start
misiujakub
16th March, 2020, 12:21 PM
CHK ok Galletto in program correct CHK, ecu send error P4A63 and 3E90
Lambda1
16th March, 2020, 12:26 PM
file from your car or another file? Its ews tampering...
Did you press starter without ecu, so rolling code changed?
misiujakub
16th March, 2020, 12:35 PM
A file from this car has run out of battery. The ECU does not start after charging and connecting. I have uploaded the first file but it still doesn't burn. EWS probably changed the code
Lambda1
16th March, 2020, 12:48 PM
Yes rolling code I think is changed.
You need good power supply... good battery and do ews sync, after.
But first programming (if you read bdm, write bdm)!
misiujakub
16th March, 2020, 12:55 PM
I'm sorry I didn't write BDM, I will improve. The car is connected to the 70A Flash Fronius power supply. I select in INPA E60> Engine DDE6.0> Activation> CAS start restore> Back> Back> Back, turn off the power, disconnect EOBD, remove the key, close the car. I open the car, put the key in, spins the moment and doesn't start.
naskochipa
16th March, 2020, 01:42 PM
Hi,
I need DPF off BMW E60 3.0d edc 16cp35 0281013500 bmw 7803369 flash BDM this ecu.
DPF broken and message error p4020, p4d03, p41ba.
Thanks for all help:tears_of_joy::tears_of_joy:
Thanks and Reputation
Pass-PM
Test and Report
Upload the original car file delete all errors and make dff and differential pressure sensor a success
Lambda1
16th March, 2020, 02:02 PM
Lol so you read via bdm but write obd :O?
Well done. Should be clear to know you shouldnt write a bdm flash file via obd or visa versa.
Seperate ecu, write in bdm and hope it will came up alive again.
If dont, hope you got backup ... get spare ecu and write backup, after write mod file for flash.
Put in car... sync
misiujakub
16th March, 2020, 02:07 PM
I always reads and programs BDM V54, EOBD I wrote about CAS DD synchronization. You misunderstood me. The driver is alive. Full car diagnostics is only an error with 4A63
Lambda1
16th March, 2020, 02:10 PM
Read CAS Modul ISN and compare to ecu isn. Reset Rolling code, allign and should run. If dont you mess something up or write wrong data.
misiujakub
16th March, 2020, 03:11 PM
Read CAS Modul ISN and compare to ecu isn. Reset Rolling code, allign and should run. If dont you mess something up or write wrong data.
ECU don't have errors in synchronization.
CAS have 1 error A0B4, if I active CAS ecu cars
VIN: unknow
Write start value : i.o
Reset CAS : i.o
Prepare DME : i.o
Start-value prog. ok reset successful.
Engine don't start.
Data Ecu write to BDM all first read.
misiujakub
16th March, 2020, 04:33 PM
In ECU don't have error, but in Measurement ,, synchronization no ok. '' , WHY ? CAS error A0B4 but starter working.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.