Please help Bmw e91 cas3

[denkodenko]

It was lost key situation. I try to program key first with vvdi2. And after that I can not so I try with zed full. NOW I CAN NOT START THE CAR.. Here its the files of Cas 3+.Can you help me pleace.?

[rob h]

There should be a healthy flash on D.K.
Write flash with prog, should fix it.
https://www.digital-kaos.co.uk/forums/showthread.php/183772-Cas3-61-35-9147196-01?highlight=61.35-9147196-01

[denkodenko]

cas 61.35-9147196-01
2073245903

[denkodenko]

Hello
Now I have a this problem. It was all key lost situation. Now I program the key. I HAVE ISN. REMOTE WORKS BUT I CAN NOT START THE CAR. MAYBE THE PROBLEM IS IN THE FLASH. PLEACE CAN ANYBODY CAN GIVE ME ANSVER WHERE IS PROBLEM, THANKS

[rob h]

You say, remote works.
Does this mean, the ignition comes on?
Does the starter engage?
Are there dtc?
Synch cas with ecu needed?

[denkodenko]

700628No. THERE IS NO IGNITION COME. Only some times I see this on display. I can only made CAS ESL SINCRO. NOT CAS DME because I do not have ignition. On diagnostic I don't have Dtc.

[rob h]

Did you perform this esl synchro?
If not, try this.
This light indicates the steering lock.
And remote works, so key is programmed ok.

[s qubiak]

https://www.digital-kaos.co.uk/forums/showthread.php/804657-CAS3-ISN-code

post#15

Hello.

I had the same.
Lock with remote control does not work, only wakes the module.

Wrong ID Code
isn of ecu.
The car has gone.

Regards.

[denkodenko]

700745
please isn

[denkodenko]

Thanks for real solution.I have before wrong ISN. Now you give me a real ISN with your calculator. PROBLEM SOLVED. THANKS A LOT

[s qubiak]

18 F7 00 B6 01 00 00 0D 80 6B 25 00 C9 DB C6 9E