HELP FORD RANGER 2017 93C86 ODOMETER

[chowan]

Hi, need support because I cannot safe the file from read memory, so the eeprom is corrupt, lost information.
who can help with file virgin for restore the odometer, appear error.
the cluster come with Kilometer.
ford ranger 2017 93c86 x16
need restore with 49000km

thank you

[jomberykaso]

You need to post the part number of cluster to get the right file

[chowan]

You need to post the part number of cluster to get the right file

Attach photo
Part number cluster Gb3t-10849-hb3zhe
Ranger wildtrak

[jomberykaso]

Report....................

[chowan]

Report....................

Yes working Buy when I puto again the cluster in the car, in a few minutes the LCD is darle, But the cluster working hey. How to fix the inconvenient

[jomberykaso]

maybe if you put cluster with ignition off....lol

[chowan]

maybe if you put cluster with ignition off....lol

I installed cluster with battery disconected, and after connect battery.

[jomberykaso]

It was a bad joke mate...I don't know what is the problem. Maybe file I posted is not the correct one for your cluster

[Rustydog]

Hi mate, im pretty new to this but...

This is a working dump from a NZ 2017 wildtrak. 60,000kms

Give it ago if you want?!

[chowan]

test tomorrown

[jomberykaso]

Hi mate, im pretty new to this but...

This is a working dump from a NZ 2017 wildtrak. 60,000kms

Give it ago if you want?!

This file has exactly 67.229 kms instead of 60.000 kms and it's not a working dump because first byte in Hex should be 80 instead of FF.

[chowan]

This file has exactly 67.229 kms instead of 60.000 kms and it's not a working dump because first byte in Hex should be 80 instead of FF.

The cluster appear error after few minutes. When Installed working for a little time. I don't know what is the problem. I can programming by ids the ipc???

[jomberykaso]

In line 0000 change from "FF" to "80"

[Rustydog]

This file has exactly 67.229 kms instead of 60.000 kms and it's not a working dump because first byte in Hex should be 80 instead of FF.

This is how it came from the Digiprog. I just assumed it was working.
Clusters then edited to 25,000km which I have uploaded. Although this one appears to be FF in 0000-0030? Yet worked fine when I installed it...

[chowan]

[QUOTE=Rustydog;3827712]This is how it came from the Digiprog. I just assumed it was working.
Clusters then edited to 25,000km which I have uploaded. Although this one appears to be FF in 0000-0030? Yet worked fine when I installed it...[/QUOTEr
I use your file and I modify with ids and good work km.
Now problem with this file is come with blindspot system, and my car dont come with this system, and now appear in lcd display the fault.
how to program with this eeprom for dont appear again the blindspot system.
I leave file modify by ids programming for who can help me for modify information in the file.
thanks

[clusters]

---------------------------------

[clusters]

There are plenty of Ranger 93c86 dumps posted here if you use the search function, or google search string (copy and paste the whole line below)

ranger 93c86 site:https://www.digital-kaos.co.uk

Find one that works 100% then adjust the mileage.

[chowan]

Who has pin puto connector For test dashboard in bank. The dashboard dying, not start anymore.

[chowan]

Solved problem, the problem was eeprom. Changed and work perfectly

[bernalmotorsport]

hello everyone, someone will have the pin out of this dash?


Sent from my iPhone using Tapatalk