View Full Version : Mitsubishi fuso canter limp mode off please
alex77vl
20th March, 2020, 11:42 AM
I need dtc off p0087 and limp mode off to 2009 mitsubishi fuso canter 3000 diesel
vitaliyl
20th March, 2020, 12:17 PM
I need dtc off p0087 and limp mode off to 2009 mitsubishi fuso canter 3000 diesel
test & report, pass pm
alex77vl
20th March, 2020, 12:20 PM
also limp mode off??????
vitaliyl
20th March, 2020, 12:27 PM
yes, check
AVDigitale
20th March, 2020, 01:15 PM
you have problem with injectors low rail pressure ,dtc won't help mechanical problem
alcorte
20th March, 2020, 09:20 PM
you have problem with injectors low rail pressure ,dtc won't help mechanical problem
I agree. Deleting the dtcs, the only thing you will achieve is that they do not appear in the table or in diagnosis, but it will continue to fail you. check the injectors, you will have the failure there.
alex77vl
20th March, 2020, 10:27 PM
I changed the injectors, new fuel pipes, new fuel filter. I only want to limp mode off from ecu
waldi1979
21st March, 2020, 12:20 AM
Try this file.
budG60
8th October, 2020, 08:55 PM
Hi,
I am having the same problem. P0087 even though pump, injectors, regulator etc all replaced. Limp mode and max 2000rpm.
I have tried with egr and limp modes off and then it passes 2000rpm, no dtc, but also no power.
Any suggestions?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.