Avalon & RAV4 & Highlander 2019 and up

[ray-ray]

128 bit proxy is used, tango reads it as RF430- (chip) same as the older Prius that can be unlock via rf with tango. If you read the Eeprom side via rf and save dump, then program that virgin proxy to a car and re read the dump from the Eeprom via rf. You will see 4 bits change making it a used proxy. I can make them new by changing the bits back, proxy virgin again. On the 2019 something change that can not be seen in the dump. The proxy will be unlock but the car refuse to take it, I’ve tried over 50 re virgin proxy without any success. But a true virgin adds right in without problem. So guys I’ve even add a new proxy then virginize it and tried to add it back to the same car (NO GO)..

look at eBay with amounts of RAV4 proxy setting the lost cost proxy for toyota.

[ray-ray]

Lots have read the post with no comments, am I talking to the wind? I’m saving you time and money don’t buy unlock proxy for the model above for the year 2019 and up.

[qeso705]

Can you share e2 from used read and virgin read from older one?

[ray-ray]

On cloner that show the pages it’s page6

[qeso705]

On cloner that show the pages it’s page6

Thanks. Whats value when its virgin? What when used? Have you any pictures?

[Tariel]

Hello ray-ray .
What are the ways to program key ( AKL) except the US dealer, if i have s a new key?

[ray-ray]

I use techstream tis with a foreman passcode, lucky me! But I’m working on a solution, just don’t know if it will work global.

[SaieedEissa]

Hello, did you find any solution for AKL for Toyota 2019 +?

[ray-ray]

From the last 2 weeks I have been testing the newest toyota for the USA market.https://youtube.com/channel/UCPhy7iSp0vZX_maDBE4TOWA maybe you see the model you are working on.

[ray-ray]

I figure out the toyota Smart key system and how the models are in groups.

Prius, Camry can be unlock and reuse without issue..



i hope these helps all members on DK

[Manta1600]

Ray you can't add AA keys directly you must copy the used key on the Tango emulator SLK7 - Program the emulator to the car with Techstream and after that copy the info from the emulator to the used unlocked key

[ray-ray]

The smart fob is it unlock when you copy to the emulator? Or is it lock?

[Manta1600]

The smart fob is it unlock when you copy to the emulator? Or is it lock?

First must unlock the AA key

Then copy the key to the emulator SLK-7

Program the emulator to the car with genuine Techstream online - Like this that you have

After that copy back the the emulator to the unlocked key from step 1 and Tango must lock it

As you told unlocked AA key can't be programmed but is possible to program the emulator

[ray-ray]

So Oem Rav4 that have been program and unlock can not be register back in to a other Rav4... after its been Unlock. But My smart Board that i have tested works after unlocking also 1 board work 3 models. would you not think its a better buy ?

[Manta1600]

Ray if your board and case are near the same quality and your new key is a cheper than genuine used RAV4 keys will be fine

but you can buy used RAV4 keys from USA ebay for around $30 each or less if you buy them directly from the scrap yards

[drugowaz]

What the hell youre talking about toyota smart keys in ebay 30usd? Biggest noncence ive ever heard

[Manta1600]

What the hell youre talking about toyota smart keys in ebay 30usd? Biggest noncence ive ever heard

Read careful about what keys we speak - RAV4 after 2018

look this lot for example - they are little bit more than $30 but if you check regulary will find around $30

https://www.ebay.com/itm/10-LOT-TOYOTA-SMART-KEY-RAV4-RAV-4-OEM-REMOTE-FOB-GENUINE-LOCKSMITH-HYQ14FBC/114729440104?epid=657693888&hash=item1ab6685368:g:rr8AAOSw~FFgHZKD

[ray-ray]

today i test on 2 suv toyota rav4 and highlander hybrid both 2021 . Used the lonsdor board 0410b and i emulated the start button using the kh100 to calculate data. when emulating all door should be closed, use the board to gather the data off the start button. press the start and hold the board near the button. the boards led light should blink when data is gather. Take the board to the kh100 that is on the net to transfer the the data to get a emergency start. the whole thing takes less then 2 minutes. hope these helps.

[Manta1600]

Thanks Ray I ordered KH100 but if this work only on AA keys is not suitable for EU cars

[ray-ray]

They make different boards with different frequency.

[Manta1600]

They make different boards with different frequency.

They make different boards if you want to program Lonsdor smart key instead the genuine

the question is the sniffing board 0440x can sniff data from all 8A keys or only from AA that I think is not used in EU

Try to sniff some Prius or Yaris

[ray-ray]

For now 8A with pg.1 (AA)

[Manta1600]

For now 8A with pg.1 (AA)

Thanks Ray

[ray-ray]

Manta 1600 what would you do next?
Here is where I’m at.
1. Prep the emulator for the next sniff. (Use tango and read dump via rf and record it.)
2. Emulate the button and gather the data. ( use tango read the dump via rf and record it.)
3. KH100E and emulator to calculate the key data. (Use tango read dump via rf and record it.)
4. Start car with emulator (read and record it.)
what if the button gives you the key ID in reverse mode and the calculator is just flipping the bits. I love these stuff, just keep feed my brain. Manta thanks for your insight ,it all helps me figure things out.

[Manta1600]

Manta 1600 what would you do next?
Here is where I’m at.
1. Prep the emulator for the next sniff. (Use tango and read dump via rf and record it.)
2. Emulate the button and gather the data. ( use tango read the dump via rf and record it.)
3. KH100E and emulator to calculate the key data. (Use tango read dump via rf and record it.)
4. Start car with emulator (read and record it.)
what if the button gives you the key ID in reverse mode and the calculator is just flipping the bits. I love these stuff, just keep feed my brain. Manta thanks for your insight ,it all helps me figure things out.

I received the KH100 but still waiting for the emulators

Yesterday I tried something similar as you told before with 8A - 88

I read the smart box on the beanch and emulated then read the emulator with Tango

When I receve the sniffers will try to see is it possible to sniff 88 to compare with data from the emulator from the dump

In UK maybe only RAV4 XA50 use AA but I never had this model to check it

but checked Corolla E210 the key is Hitag AES and Tango can't unlock

[ray-ray]

Here Corolla aes no unlock or can not read out (tried with tango original)

[Weasel3]

So its KH100E and not the 100+ version ? Which is an update of the KH100.

I searched a bit round this, a while back.
And concluded that 100+, would do the same job with the prox. Since 100E, was not nothing to be found.
But this is not the case?

[Manta1600]

So its KH100E and not the 100+ version ? Which is an update of the KH100.

I searched a bit round this, a while back.
And concluded that 100+, would do the same job with the prox. Since 100E, was not nothing to be found.
But this is not the case?

Both will work the problem is that at the moment work only for AA keys that in UK use maybe only RAV4 and Highlander

I saw one video with A9 but think that is fake as Ray told only AA work at the moment

[Manta1600]

Here Corolla aes no unlock or can not read out (tried with tango original)

I read it like hitag AES but not possible to unlock - for this model the only solution maybe is to replace the smart ecu and reset the code box