REV HARDCUT LIMITER BMW EDC17C06

[tomek3232]

Hi guys! Can someone hardcut limiter to 4000rpm on neutral and while driving in this file ?

[naskochipa]

Hi guys! Can someone hardcut limiter to 4000rpm on neutral and while driving in this file ?

THANKS AND EPUTATION =PASS

PASS-PM

TEST AND REPORT

[tomek3232]

I tested. Not work :/

[AVDigitale]

automatic software not work good in this ecu :D

[tomek3232]

your info is not needed...

[a500tut]

Hi guys! Can someone hardcut limiter to 4000rpm on neutral and while driving in this file ?

Thanks and report.

[Shathe53]

automatic software not work good in this ecu :DMister I know everything has failed. Lol

[Shathe53]

Hi guys! Can someone hardcut limiter to 4000rpm on neutral and while driving in this file ?

Here your file mod .

[naskochipa]

I tested. Not work :/


Impossible I have made thousands of EDC17 HARD CUT manually these clowns say whatever they want I don't use HARD CUT software write to me and explain what the problem is

[Shathe53]

Impossible I have made thousands of EDC17 HARD CUT manually these clowns say whatever they want I don't use HARD CUT software write to me and explain what the problem is


Don't worry Naskochipa give me the password and I'll tell you where you are wrong. Lol:rofl:

[naskochipa]

Don't worry Naskochipa give me the password and I'll tell you where you are wrong. Lol:rofl:

Well I'm waiting for your expert opinion only that if you love don't use EDC15P EDITOR because it doesn't work for that ECU

[naskochipa]

Don't worry Naskochipa give me the password and I'll tell you where you are wrong. Lol:rofl:

You look at my file for an hour, looking at where I'm wrong I'm waiting to say or I still haven't figured out how to do the factor hahaha

[Shathe53]

You look at my file for an hour, looking at where I'm wrong I'm waiting to say or I still haven't figured out how to do the factor hahaha

ok , i need only 10 minute, give me your pass in pm now.

[naskochipa]

ok , i need only 10 minute, give me your pass in pm now.

hahahahhah

pass-Shathe53 Is a good tuner

[marko6jpt]

Hi there,
Can anyone tell me how it's done?
I know "at least from what I've read" that's done by editing the rev axis in torque limiting maps..
But there's some trick or something?
I'm trying in a e46 150hp Edc16c31 but can't figure it out..
Many thanks

[naskochipa]

Hi there,
Can anyone tell me how it's done?
I know "at least from what I've read" that's done by editing the rev axis in torque limiting maps..
But there's some trick or something?
I'm trying in a e46 150hp Edc16c31 but can't figure it out..
Many thanks


Upload your file, write how many RPMs you want and I'll do it

[tothzsolt]

tomek3232 (https://www.digital-kaos.co.uk/forums/member.php/106082-tomek3232)

hi here's a good solution that works 100%

test and reply

thnx button for help after send rar pass to pm

[marko6jpt]

710080
Upload your file, write how many RPMs you want and I'll do it

Thanks for your help, I'd like to have on 4400rpm pls

Edit: If u don´t mind give me a clue / teach me how's made too :D

[chrisimerk]

710080

Thanks for your help, I'd like to have on 4400rpm pls

Edit: If u don´t mind give me a clue / teach me how's made too :D

here you go also included launch control at 2400

and it can be done by 2 ways editing TL maps or editing IQ map i have gone with TL maps these also have a SVRL but sometimes it works and sometimes it doesnt

pass in pm

[marko6jpt]

Thank u
Tomorrow I'll test it and report ;)

[pecalin]

I got a good result from Nm to IQ conversion map, edc17cp14
You’ll have to disable a DTC after that; so the spiral MIL won’t show up.
Carefully that these kind of mods on a diesel, will add a major stress on your clutch, transmission elements and timing belt when used.

https://youtube.com/shorts/8L6knP42Wd0?feature=share

Bless

[marko6jpt]

u can do it via SVRL near TQL Maps or NM2IQ conversion table

[capkin92]

Hi guys! Can someone hardcut limiter to 4000rpm on neutral and while driving in this file ?




% 100 work
try and report

[JLtune]

Hi, there!

Bought an e91 n47 105kw, but there is something done with software already, including hardcut/popcorn while not moving in neutral.
I got banned of course in yearly inspection with this hardcut.
I would be thankful if someone could help and undo it, so I can rev it as original. (cannot flash some original file, because dpf and egr are off too, and don't have that much time at the moment, to discover file by myself as I don't have experience with edc17 yet).

HW: 08512499
SW: 1037507453
Have a good weekend! :beer: