17 mazda cx-5 KB7W 57K30

[glenchafe]

can anyone please help with clear data for this module. 17 mazda cx-5 KB7W 57K30 EEPROM 95128 , I have two clear files but first leaves u3000 code second sets c0061:29 both codes tell me replace module , does anyone have solution to this? I will list files in following order 1 original crash file 2 clear file that gives me u3000 3 clear file that gives me c0061:29

[slick_dick]

c0061:29 - does this code put on a abs fault on dash?

check in abs see if accleration sensor needs calibrating via special functions

br

slick

[glenchafe]

no abs the code sets in rcm and code says clear if it comes back replace module the u3000 in the first file tells you same thing. I seen in a post on same module that it is a driver issue but why do I get different results with different files.
so now I am not sure if its actually internal problem or the file. any good solutions greatly appreciated

[Vladimir.zheurov]

Your first file is bad. Try this one. Foreign files cannot be written.

[glenchafe]

i will test and report back thanks

[glenchafe]

hi just wanted to be clear the first file is the original crash file the second is the original cleared by cpt which gave me a u3000:49 the third is a file I got through some one else which was suppose to be a good known file which gave me a c0061:29 both codes if you follow diagnostic procedure ell you to replace module. I am going to try your file just wanted to be clear that the first file is the original and second was first file cleared using cpt

[Vladimir.zheurov]

The first file has an error, so when you delete a crash, you get the U3000 in a second file. The third file is another; you cannot write it. I tried to fix your file, try and report the result.

[glenchafe]

ok I wrote your file in chip and reinstalled chip , I haven't been able to try in car yet but I read codes on desk and still has u3000-49 when I clear and read again its there but I will report back once I try in car tommorow

[glenchafe]

wanted to let you know still as u3000:49

[Vladimir.zheurov]

u3000:49 - electrical malfunction

[glenchafe]

thanks for every ones help