View Full Version : BMW GT1 cable
cccosminus
9th January, 2010, 11:15 PM
hi everybody,:ciao:
I have an GT1 tester (clone in fact :) ), and i have one big problem with LAN cable. I was doing something wrong and i broke this cable, on the side with ODU connector (at the end from diag. head), and i don t know what configuration was.
Could somebody help me with this cable pinouts?? :help:
lolo.lolo
10th January, 2010, 09:52 AM
Hi guys
Please see the attachment.
The pinout for the DK to OBD cable and the LAN cable.
The pinouts are for "MY CABLES" !!! so ... use a DMM before plug in !!!
I'm using a DK2 original not clone, DIS V44, V52, V55, SSS V30 on vmware and a desktop IBM.
The lan cable is the same for DK2(GT1), OPS and OPPS(SSS)
Have fun!
dzingis
11th January, 2010, 01:39 AM
Hi all,
Do you now is it possible to buy somewhere this metal plug from ops side?
regards
darnah1805
21st March, 2010, 10:37 AM
Dear lolo lolo
I want to thank you very much too.
I have same problem with my GT1.
I will try to make it today.
Please inform me if there any problem may be happend to my GT1 Devise , because i tried many times to connect the cable and may be i make some thing wrong.
Thanks,
chamaur
25th May, 2010, 12:02 AM
Is it a good idea to solder it back? Sorry this is my first time doing this.
cccosminus
30th May, 2010, 10:40 PM
No problem soldering,..but with attention.
bjorrieken
13th July, 2010, 09:31 AM
Thanks for giving the details of the cabling to us.
How do you get this info?
greetz bjorrieken
abbas1411
16th January, 2013, 03:27 PM
I have same issue.. would appreciate the pin outs so i can repair
videosony
22nd January, 2013, 04:42 PM
Are pins on both side directly connected or over converter?
Thanks
stephjac
4th June, 2020, 01:44 AM
I'm in the same boat, got an OPPS unit and no cables.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.