IMMO off Audi A4 2.5 swap pump VP44

[traxpalicaru]

Hi friends, can someone help me with immo off or ecu pin for that ecu? Audi A4 2.5 V6


EDC15VM+ 0 281 010 493

[armi]

Hi, PIN is 1759.

[brend]

For VCDS .....01759......

[dimon9555]

Will write the login incorrect even if it is correct, there is a problem in the dump

[traxpalicaru]

Thanks, the pin work but nothing changed, the car not start, the rpm rise up when i crank. I don't know what to do. The cluster now show the mileage "Error". On 25 immo not connecting. The immo key in the cluster are not fliking

[12manux]

Hi, did you attempted to read the pin from the Rb4 cluster?

[traxpalicaru]

No, i don't disassembled the cluster, he comes like that with problems.

[12manux]

Well someone tried to read or write dump from the cluster and that s why the cluster is corrupted. Happened to me before

[traxpalicaru]

Well someone tried to read or write dump from the cluster and that s why the cluster is corrupted. Happened to me before

Ok, thanks for info, and now what can i do?? I not make that every day, is a new stuff for me, i m just electronist, i have xgecu programmer with all adapters TL866II, can i read eeprom for check?

[12manux]

Only tool that would fix the cluster would be carprog, even the clone one. Succes

[traxpalicaru]

Only tool that would fix the cluster would be carprog, even the clone one. Succes
And that is the problem for not start the engine?

[12manux]

Yes, the imobilizer is located in the cluster.

[12manux]

The best solution for you is the following :
-give up on idea for immo off because the climate control won t work after

1.you have the pin from ecu and you have 50/50 chances.
2.follow the Ross Tech procedure for immo3 and try to read apt the cluster with vcds afterthat the keys.
3.if you not succeed, buy another cluster from some one who can give you the pin and adapt it to your car problem solved.
I went with 3rd option when I dealed with this type of cluster. https://uploads.tapatalk-cdn.com/20200330/5e97bcb49a97b0455e5794b8fb553d8d.jpg

[12manux]

Also go on Abs module and note down the coding because you will loose it

[Mario6]

traxpalicaru (https://www.digital-kaos.co.uk/forums/member.php/536762-traxpalicaru)

Your IMMO status is "OFF". The ECM is not "blocked by the immobilizer" So if your fuel pump is operational and vented, the car should start. Use the chemical "sprey" "starter" to start the engine

[traxpalicaru]

Hi, thanks for help but now i think i have another problem, the car comes to me with not start. The ECU pump is damaged and i think was not correct tipe. I have buyed another pump with next code : mecanic : 059130106J Electronic (ecu): 0281010479 and i think is not good for that engine AKE 2.5. The cluster are corruptet too, i can't adapt with vcds and pin extracted from ECU engine says Malfunction.

ECU engine : 8E0 907 401 C / 0 281 010 493

[dimon9555]

For engine AKE need pump 059130106L