PDA

View Full Version : POLO 14TDI immo problem



davorOS
31st March, 2020, 03:35 PM
hi

I have 2006 polo non starter with ecu fault blocked with immobilizer

I have read dash pin(8667) and it is accepted by dasboard but rejected by ecu

also no VIN and ID in ecu channel 81

ecu is EDC17U05
045 906 013
0281012551

any one have good working solution for ECU?

I read flash from ecu but it gave me wrong pin code and unknown immo status
flash rad with AVDI

thatnk you

rafal
31st March, 2020, 03:41 PM
off.................
if need immo data post eeprom

carmoh
31st March, 2020, 04:28 PM
Hello
if your ecu is blocked switch on the ignition for half an hour
it could work