volvo s80 ik78x dash DIM problem

[hguritr]

i have volvo s80 2008 wiith dim HW: 30786463AB , Sw:31270359AA,30786489AA,31270046AA,31254519AA... i have read flash 1k78x with r270 programmer ,,, i want to change the language on albanian ... at the language area i have changed , and i have write it ... now is the problem , when cluster start working it show for 4 sec the right error mesage and after it show the error with numbers (i have attach foto) ... when i make diagnostic it show me the error as trip computer switch , which after it work correctly ... i have re-write the ori flash , still the same , it show error on english and after 4 sec the same problem... i have try on forum the same flash but on sweeden , still the same error ... can anyone explain what error will be ?! thank you very much everyone

[kaponne]

hi,
try upload this file

[scaro]

I dont know this dim as much, but you havnt bridge something with solder ? That goes to reset button that makes it reset all the time?

[hguritr]

no nothing ... do you have eeprom please ? i think i have the eeprom damanged ... thanks

hi,
try upload this file

[kaponne]

eepom for 2008

[hguritr]

Still the same problem... i think thr dash is damanged... also it doenst work trip km while driving...

[scaro]

Have you checked for solder bridges or button for reset hangs?

[hguritr]

your file is 31254535aa , its a diesel cluster ,,, mine is 31254534aa petrol cluster ... thank you

[TOINO]

i think r 270 misread your dump now try to rewrite the original with r 270 see if your cluster goes back to normal if not the case will have to write a new dump but with a better tool to recover the cluster,