View Full Version : CAS f*cked after odo correct by noobs
hrmotorsport
3rd April, 2020, 06:45 PM
Hi all, i have a X6 with error in dme "Tampered ews" cas not have any trouble, car cranks but not start. Customer goes to some noob that ~~~~ed cas touching odometer and not make before a backup, so now is damaged.m i tried do syncro between cas dme but always say "not possible"
i think may be flash is damaged but i know are a lot info into cas. i atached flash and eep, and photo label, and all info i readed with avdi.
app 9287534
index coding 9
hardware c4
soft funcional 2.8.1
soft service 3.3.0
variant index 21313
diag index 1696
0042n7df229s
part number 9389116
sw 6112233
WBAFG01020L329637
if somebody can help me, i need flash from same ref and version, or correct eprom, i dont know what is damaged exactly
tothzsolt
3rd April, 2020, 07:03 PM
WBAFG01020L329637
cas is boot mode....no ISN cod everything is fffffffffffffffffffffffffffffff
cas3+=147056km
test and probe syncro cas3+ boot mod unlock (Normal mode) write new modi eeprom to cas3+ and syncro ecu and cas again
morgano
3rd April, 2020, 09:28 PM
Don't know if syncro will work if the ISN of the DME is not put into cas before attempting the Sync procedure.
doctore
3rd April, 2020, 09:56 PM
Hi all, i have a X6 with error in dme "Tampered ews" cas not have any trouble, car cranks but not start. Customer goes to some noob that ~~~~ed cas touching odometer and not make before a backup, so now is damaged.m i tried do syncro between cas dme but always say "not possible"
i think may be flash is damaged but i know are a lot info into cas. i atached flash and eep, and photo label, and all info i readed with avdi.
app 9287534
index coding 9
hardware c4
soft funcional 2.8.1
soft service 3.3.0
variant index 21313
diag index 1696
0042n7df229s
part number 9389116
sw 6112233
WBAFG01020L329637
if somebody can help me, i need flash from same ref and version, or correct eprom, i dont know what is damaged exactly
What ecu its on car:)
hrmotorsport
3rd April, 2020, 10:14 PM
Thanks for all answers, tomorrow i will post results
Enviado desde mi iPhone utilizando Tapatalk
hrmotorsport
4th April, 2020, 11:13 AM
this files say customer is from backup... readed with xprog clone, i dont know it its ok
i will post what ecu have.
br
tothzsolt
4th April, 2020, 11:36 AM
hrmotorsport (https://www.digital-kaos.co.uk/forums/member.php/521187-hrmotorsport)
not good the same is boot mode and isn ffffffffffffffffff, enter my mod file cas3 + where I am unlock cas3_ boot mode and now it's in Normal mode and my opinion is that you could now do SYNC via AVI or FVDI or LAUNCH ...
hrmotorsport
4th April, 2020, 12:27 PM
hi syncro is not possible with your file, ecu is edc16c35 d62057a0
br
Talleresmalaga
4th April, 2020, 01:07 PM
Last x6 i did, it was problem ews 4.1
a fellow from the forum prepared a virgin file with isn
was to synchronize and start
Cheers
hrmotorsport
4th April, 2020, 03:09 PM
hi, here are eprom from ecu, anyone can write me ISN from dme?
tothzsolt
5th April, 2020, 10:09 AM
hrmotorsport (https://www.digital-kaos.co.uk/forums/member.php/521187-hrmotorsport)
BMW ecu isn read obd2................
kiszka
5th April, 2020, 10:18 AM
hi, here are eprom from ecu, anyone can write me ISN from dme?
... E95E ....
tothzsolt
5th April, 2020, 10:21 AM
E9 5E (Checksum-Error)
hrmotorsport
5th April, 2020, 10:28 AM
Yes i readed only e95e but avdi requires more values. Xx xx xx xx, then is 00 00 e9 5e
Checksum error in dme? How to fix?
Enviado desde mi iPhone utilizando Tapatalk
kiszka
5th April, 2020, 10:51 AM
Yes i readed only e95e but avdi requires more values. Xx xx xx xx, then is 00 00 e9 5e
Checksum error in dme? How to fix?
Enviado desde mi iPhone utilizando Tapatalk
eeprom cas and ecu is ok isn
more info click on the text, pass on PM (https://mega.nz/file/gmA3SCDI)
hrmotorsport
5th April, 2020, 11:29 AM
Later i will test
Thanks a lot
Enviado desde mi iPhone utilizando Tapatalk
hrmotorsport
6th April, 2020, 12:17 AM
eeprom cas and ecu is ok isn
more info click on the text, pass on PM (https://mega.nz/file/gmA3SCDI)
Hi, with your ecu eeprom not have any dtc, but with your eeprom cas then have internal fault, so, i wrote your ecu eeprom with original eeprom, then sync dme cas and car start!
But now i cant enter any gear, so, tomorrow will check what happend.
Thanks
Enviado desde mi iPhone utilizando Tapatalk
hrmotorsport
6th April, 2020, 10:03 AM
Excuse me, with your eeproms car start ok, but not syncro egs, if i do syncro with avdi, then car not start anymore and can t do sync between cas dme.
when start syncro egs process, avdi say FF FF FB FF is stored in egs and only give me option to write this isn into cas, not cas into egs.
br
hrmotorsport
6th April, 2020, 03:00 PM
Finally solved, thanks to @kiszka for your help and support. now isn is syncronized dme cas and egs, all fine!
Galee
6th April, 2020, 03:58 PM
What was the cure please?
hrmotorsport
6th April, 2020, 06:09 PM
Kiszka prepared ecu eeprom and cas eprom fixed, then let me do syncro and start, later do syncro between egs with avdi
Enviado desde mi iPhone utilizando Tapatalk
morgano
6th April, 2020, 06:10 PM
What was the cure please?
Cure for this was kiszka ;)
hrmotorsport
6th April, 2020, 06:10 PM
And thanks fo all other people help me too
Enviado desde mi iPhone utilizando Tapatalk
crankycarl
7th April, 2020, 02:58 AM
Cure for this was kiszka ;)
anytime i read his posts
all i see is
"....."
jomberykaso
7th April, 2020, 03:19 AM
anytime i read his posts
all i see is
"....."
The important thing is not his comments.
The important thing is he helps a lot with his files.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.